When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After popular request it is finally here!!
Utilizing the same modular mounting pattern as my original conductor mount, I went ahead and took precise measurements of the threaded body of the conductor pro and made a full threaded internal design for the mount. This mount works by having the conductor pro fully screw in and seat and is also easily removable now by unscrewing the conductor pro for a seamless, easy install!
.
I put the orientation screen from dsp tool to show that regardless of how you mount it, you can change it to whatever works for you. For example if mounting upside down you can do 180 degrees or sideways you can do 90 degrees or whatever it may be.
.
It is truly a versatile, modular product that is easy to upgrade the original conductor mount to this if you upgraded your non pro to the conductor pro.
.
Made of carbon fiber infused filament that is then heat treated, this can withstand hot car environments just fine and I have tested it up to 102 degrees F ambient temp inside the vehicle.
.
Comes with
(1) conductor pro mount
(2) countersunk screws with exact length (mounting holes are countersunk on purpose to reduce crack propagations)
.
This was prototyped with the help of a member of DIYMA and personal, extensive testing to where I optimized the cross sectional area to improve resistant to crack propagations as well as finding the correct shaping that is compact enough for most vehicle interiors!
.
Thread design and material has been cycle tested/wear tested 60+ times to ensure these can be removed and installed much more than the average consumer
.
Modern styling, ergonomically friendly, and minimalistic look to give the Helix Conductor pro a clean mount
.
Note : I will not be responsible for returns due to misuse, warping, or cracking. I have tested these in the real world to be as strong as possible while taking multiple parameters into careful consideration. Please understand the level of R&D involved in my products and how much time it takes to bring a product from scratch to reality with a good reliability factor. I am always a message away and I will understand if you are having major issues.
.
As a mechanical engineer and audiophile with a background in reliability engineering, product design, supplier quality engineering, and manufacturing engineering, I take pride in my work to give everyone a good working product that exceeds expectations!
Thank you
- Ashwin (AshGS400 DIYMA)
