When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Helix conductor 90 degree mount (I also sell a 120 degree mount as well :)
****please note: the conductor PRO does NOT fit this mount, only the non pro does. Please see separate listing on my page for PRO compatible mount)****.
Made of carbon fiber infused filament that is then heat treated, this can withstand hot car environments just fine and I have tested it up to 102 degrees F inside the car (outside ambient temp being 102F). Very strong design
.
Comes with
(1) conductor mount
(2) countersunk screws with exact length (mounting holes are countersunk on purpose to reduce crack propagations)
.
This was prototyped with the help of a member of DIYMA and I optimized the cross sectional area to improve resistant to crack propagations as well as finding the correct shaping that is compact enough for a lot of car interiors.
.
Update - Dec 2025, I have received response from several buyers where it is a “perfect fit” :)
.
I have also went ahead and thermal shock cycle tested this design and filament from 0 deg F to 180 deg F. No cracks or surface defects formed from the test. I have also done an additional heat soak test at 170F for 1 hour to see any sag or warpage and these have taken it like a champ with no deformations!
.
Modern styling but minimalistic look to give the Helix Conductor a clean mount
.
Note : I will not be responsible for returns due to misuse, warping, or cracking. I have tested these in the real world to be as strong as possible while taking multiple parameters into careful consideration. Please understand the level of R&D involved in my products and how much time it takes to bring a product from scratch to reality with a good reliability factor. I am always a message away and I will understand if you are having major issues.
.
As a mechanical engineer and audiophile with a background in reliability engineering, product design, and manufacturing engineering, I take pride in my work to give everyone a good working product that exceeds expectations!
Thank you
- Ashwin (AshGS400 DIYMA)
