When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Helix conductor 30 degree mount (it is actually a 120 degree mount since it is 30 degrees from the origin or 120 degrees from the mounting plane.) ****please note: the conductor PRO does NOT fit this mount, only the non pro does. Please see separate listing on my page for pro compatible mount)****
.
can mount it standing up or you can utilize the additional 30 degrees on surfaces like steering columns to get the more ergonomic friendly mounting configuration.
.
Made of carbon fiber infused filament that is then heat treated, this can withstand hot car environments just fine and I have tested it up to 102 degrees F. Very strong design
.
Comes with
(1) conductor mount
(2) flush head screws since this mount features hidden mounts for a truly hidden finishNote : The hidden design means that the screw holes are on the back and you fasten it to the panel you are securing it to where the screw head sandwiches the mounting surface to the surface area of the mount to provide a “hidden” look where no screws or screw holes will be seen from the viewing angle.
.
This was prototyped with the help of a member of DIYMA and I optimized the cross sectional area to improve resistant to crack propagations as well as finding the correct shaping that is compact enough for a lot of car interiors.
.
I have also went ahead and thermal shock cycle tested this design and filament from 0 deg F to 180 deg F. No cracks or surface defects formed from the test.
.
Modern styling but minimalistic look to give the Helix Conductor a clean mount
.
Note : I will not be responsible for returns due to misuse, warping, or cracking. I have tested these in the real world to be as strong as possible while taking multiple parameters into careful consideration. Please understand the level of R&D involved in my products and how much time it takes to bring a product from scratch to reality with a good reliability factor. I am always a message away and I will understand if you are having major issues.
.
As a mechanical engineer and audiophile with a background in reliability engineering, product design, and manufacturing engineering, I take pride in my work to give everyone a good working product that exceeds expectations!
Thank you
- Ashwin (AshGS400 DIYMA)
