When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
🔥 CARVER MXR-130 “THE RECEIVER” — MAGNETIC FIELD POWER AMPLIFIER
This is not an ordinary vintage stereo receiver.
The Carver MXR-130 combines Bob Carver-era engineering, substantial stereo power, a full analog preamplifier/control section and Carver\'s distinctive tuner technology in one of the company\'s classic early-1980s receivers.
The front panel proudly identifies its amplifier section as:
MAGNETIC FIELD POWER AMPLIFIER
And the original rear identification plate on THIS unit confirms:
CARVERMXR-130MADE IN 130 WATTS PER CHANNEL
The MXR-130 delivers serious power for a vintage receiver.
◆ 130 watts per channel RMS◆ 8-ohm load◆ Both channels driven◆ 20Hz–20kHz◆ Rated at no more than 0.05% THD
That combination of power and low rated distortion makes the MXR-130 substantially more capable than the typical moderate-power stereo receiver of its era.
This was designed to drive a serious pair of CARVER MAGNETIC FIELD POWER AMPLIFIER
One of the defining features of this receiver is Carver\'s Magnetic Field power-supply/amplifier technology.
Bob Carver\'s approach was developed to provide substantial amplifier output without requiring the enormous conventional power transformer and extremely heavy chassis normally associated with high-powered amplifiers of the period.
The result helped establish the distinctive engineering identity associated with classic Carver FULL ANALOG CONTROL SECTION
The MXR-130 provides the tactile control layout enthusiasts expect from serious vintage hi-fi:
◆ Bass◆ Midrange◆ Treble◆ Balance◆ Loudness◆ Speaker selection◆ Tape monitoring◆ Multipath / Noise functions◆ Large master Volume control◆ Headphone output
The three-band Bass / Midrange / Treble arrangement provides more tonal flexibility than the simple two-control tone sections found on many competing DEDICATED PHONO INPUT
VINYL IS COVERED.
The MXR-130 includes a dedicated PHONO input and rear grounding terminal for integration with a traditional turntable.
No separate external phono preamplifier is required for a compatible moving-magnet cartridge setup.
That makes the Carver particularly attractive as the centerpiece of a vintage two-channel PRE OUT / MAIN IN
One of the most valuable features on the rear panel is the separate:
PRE OUTMAIN IN
connections with the original jumpers installed.
This dramatically increases system flexibility.
The MXR-130 can be used conventionally as a complete receiver, while its preamplifier and power-amplifier sections can also be integrated separately with compatible external equipment.
For vintage audio enthusiasts who like experimenting with different amplifiers, processors or preamplifiers, this is a major CARVER FM TUNER TECHNOLOGY
The MXR-130 incorporates Carver\'s:
ASYMMETRICAL CHARGE COUPLED FM DETECTOR
The front tuner section provides digital frequency indication, signal-strength display, stereo and locked indicators, preset memory controls and automatic/manual tuning.
This was a serious tuner section rather than an FM radio added merely as an EXTENSIVE ANALOG CONNECTIVITY
Rear connections include:
◆ PHONO◆ VIDEO/DAD◆ AUX◆ TAPE 1 IN / OUT◆ TAPE 2 IN / OUT◆ PRE OUT◆ MAIN IN◆ FM/AM antenna connections◆ Speaker A◆ Speaker B
Two sets of speaker outputs allow connection of separate A and B speaker MADE IN JAPAN
The original identification plate on THIS receiver clearly states:
CARVERMXR-130MADE IN JAPAN
The serial number plate is also intact.
This is an authentic vintage Carver component from the company\'s classic CLASSIC CARVER APPEARANCE
The MXR-130 has a distinctive technical aesthetic that immediately separates it from conventional Japanese receivers of the period.
The brushed-metal front panel, dark digital tuner section, large volume control, numerous physical controls and long power-level display create an unmistakably Carver appearance.
This example shows genuine vintage cosmetic wear.
The top cabinet has visible scratches, edge wear and several finish chips, particularly around the upper edges and corners.
The front panel remains attractive overall.
Please study the detailed photographs carefully for exact cosmetic WHAT’S INCLUDED
✔ ONE Carver MXR-130 Stereo Receiver✔ Original PRE OUT / MAIN IN Jumpers✔ Attached AC Power Cord
No remote control or additional accessories are EXACT ITEM — NO STOCK PHOTOS
You will receive the EXACT Carver MXR-130 pictured in this listing.
Every photograph shows the ACTUAL receiver being offered.
NO STOCK PHOTOS.
The photographs clearly document the faceplate, controls, tuner section, cabinet condition, rear connections, speaker terminals, original jumpers and Made in Japan identification plate.
WHAT YOU SEE IS WHAT YOU WHY BUY FROM MIDENCE & CO.?
At Midence & Co., audio and video equipment is carefully selected, inspected and presented with particular attention to condition, accuracy and transparency.
🔍 Equipment is carefully inspected before listing.
📸 Actual-item photography — no generic stock photos.
📝 Cosmetic condition and included accessories are clearly disclosed.
🎵 Vintage audio equipment is presented with attention to its original engineering and features.
🔎 Detailed photographs document the exact component being offered.
📦 Every component is carefully prepared and professionally packed for SHIPPING & HANDLING
📦 Buyer pays shipping.
📦 Professionally packed using premium packing materials and the same standards used for equipment from our personal collection.
📦 Heavy-duty double-wall shipping box.
📦 Multiple layers of kraft paper.
📦 DOUBLE-BOXED.
📦 Fully insured for 100% of the purchase value.
📦 Exterior stretch wrap for additional protection during transportation.
