When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CLASSIC20 112 COMBO GUITAR AMPLIFIER
Introducing the new Peavey Classic 20 watt 112 combo with anall-tube preamp and power amp, providing the distinctive sonic punch of thelarger, iconic amplifiers on which it is based, but in a more compact footprint(7.25\" x 14\" x 7.75\"/185mm x 356mm x197mm) weighingsignificantly less (34.7 lbs/15.7 kg). This latest addition brings new lifeinto the legendary product line by now providing players that iconic tone in apackage better accommodating to today\'s smaller stage and bedroom performances.
Boasting two channels that mirror the same voicing and gainstructure of its bigger Peavey amplifier siblings, in addition to a speciallydesigned boost function, the Classic 20 112 Combo is a versatile, powerful unitthat is equally suitable to virtually all musical styles.
Two EL84 power tubes and three 12AX7/ECC83 preamp tubesdeliver the rich, warm tube-amplifier tones that are so sought after by playersand engineers. Each of the Peavey Classic 20 112 Combo\'s channels shares EQ, aneffects loop, and reverb (all footswitchable), while the amp\'s rear panelfeatures Microphone Simulated Direct Interface (MSDI) with XLR output and USBout, 3-position power attenuator switch allowing for 20 watt, 5 watt or 1 wattoperation, and speaker defeat switch.
The Classic 20 112 Combo\'s front panel includes a ¼\"INPUT jack, VOLUME knob, CHANNEL switch for selection of \'LEAD\' or \'RHYTHM\'channels, PRE-GAIN to control the input level of the lead channel (i.e.overdrive and gain), POST GAIN to balance the sound between the two channels,BASS, MIDDLE, & TREBLE EQ controls, REVERB to dial in the amount ofambience, a Pilot Light indicating when AC power is being supplied and theClassic 20 112 Combo\'s POWER SWITCH is in the \"ON\" position, STANDBYswitch, and OUTPUT TUBE STATUS INDICATION (T.S.I.) LEDS that illuminate red orgreen, depending on the status of the output tube they are monitoring.
- 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes
- Two footswitchable channels with three-band EQ
- Footswitchable volume boost on both channels
- Footswitchable reverb
- Footswitchable buffered effects Loop
- Tube Status Indication (T.S.I.) circuit
- Impedance switch for 16 or 8 ohm cabinets
- MSDI™ Output with XLR and ground lift switch
- USB Output
- Speaker defeat switch
- Headphone output
- Attenuator switch for 20 watts, 5 watts or 1 watt outputpower
- Single 16 Ohm Peavey Sheffield 1230+
- Weight Packed: 38.58 lb(17.5 kg)
- Width Packed: 22.2\"(56.388 cm)
- Height Packed: 23.8\"(60.452 cm)
- Depth Packed: 13.8\"(35.052 cm)
