When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
US Automatic 070305 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector
US Automatic 070305 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector
NOTE: CP-4 IS NOT A SAFETY. YOU MUSTADD EXTERNAL SAFETY WHEN USING CP-4.
SELF-CONTAINED SYSTEM WITH LOW STANDBY CURRENT - Open gates automatically as guests leave a property with this all-in-one system that works with electric or solar gates. Lowest standby current in the industry by 95%.
All-in-one unit without external circuit board. Hook wires directly to gate operator.
• CP-4 may be installed above ground by screwing“puck” directly to an immovable object.• If installed above ground, use conduit tomechanically protect cable (animals will eat).• Car should be going at least 5 MPH at sensorto be detected.Install CP-4 at least:• 6-10 feet away from buried power, telephone,or invisible dog fence• 10 feet away from natural gas lines• 20 feet away from power pole with atransformer• 100 feet back from railroad traffic• 200 feet away from high power substationpower lines• 80-100 feet back from gate operator Payments & Returns Policy
