RGB2HDMI Amiga 500 UltraLong (Accelerator Friendly) HDMI Games, non-RTG A500 For Sale

New High-quality RGB2HDMI Ultra-Long for the Denise socket (Raspberry Pi Zero 1/2 required). This is probably the best quality flicker-free video possible from an Amiga. Box / Installation instructions areincluded. This is the ultra long version designed to allow extra space around the CPU in an Amiga 500.
High-quality Ultra-Long board with CPLD.
If this does not meet your spatial requirements check alternate designs: Best FlickerFixer RGB2HDMI Amiga HDMI Games, non-RTG A500 / A500 plus CPLD v2 | RGB2HDMI Amiga HDMI Games, non-RTG A500 / A500 plus | RGB2HDMI Amiga HDMI Games, non-RTG A2000 / A500 / A500 plus | Best FlickerFixer RGB2HDMI Amiga HDMI Games, non-RTG A2000CPLDSlot v2.2 | External RGB2HDMI Amiga Mac Atari Commodore & more Retro HDMI Games, non-RTG |

• Fully assembled, Brilliant \"Commodore blue\" premium PCB with Xilinx CPLD.
• CPLD version for maximum configure-ability/programmability and to avoid \"sparkling pixel\" artifacts.
• button included* (see pictures)
• works great for non-RTG standard display modes such as Games, boot screen, etc.
• Pre-flashed and ready, but you will still need to install the software on the SD Card for the Pi.
• All high-quality hardware components installed
• on-screen menu that enables adjusting video including auto-calibration, flashing firmware, profiles, and more.
• connect your monitor to the Raspberry Pi\'s HDMI port.
• works with low-cost Raspberry Pi Zero and Raspberry Pi Zero 2 (with the latest software).
• works with a small and economical SD Card in the Raspberry Pi Zero, like 1GB; the software only takes approx. 30MB (depending on version)
• works well with most any expansion such as a PiStorm and Accelerators. Basically, it works independently.
• automatically boots/shutoff with the Amiga

A500 CPLD board (plugs directly into the Denise socket and Raspberry Pi Zero)
What you will need (not included):

• Raspberry Pi Zero, Raspberry Pi Zero 2, or Raspberry Pi 3/4 with Header Pins installed
• SD Card to install the software.
• Mini-HDMI cable or adapter to connect to a monitor.
• You may need to modify your case to install the button and/or HDMI port, but this is up to you.

We reserve the right to change the shipping type/carrier when free shipping is selected to improve speed and/or cost