When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ECCPP-Headlights and Assurance]100% Brand New!Fully sealed with solid silicone and designed with one-way vents to prevent moisture from entering the chassis. There is no need to worry about corrosion or moisture under any conditions.2.[Impact Resistant & Tough]Using durable polycarbonate lenses that provide good protection, cover imperfections and eliminate shock on the trails, the high-impact shell can also better withstand the shock and vibration of off-road risks.3.[Brighter Lighting & Safety] Pair Kit Halogen Headlights w/Bulbs For 2013-2015 Chevrolet Malibu Black Amber
100% Brand New!Fully sealed with solid silicone and designed with one-way vents to prevent moisture from entering the chassis. There is no need to worry about corrosion or moisture under any conditions.
2.[Impact Resistant & Tough]
Using durable polycarbonate lenses that provide good protection, cover imperfections and eliminate shock on the trails, the high-impact shell can also better withstand the shock and vibration of off-road risks.
3.[Brighter Lighting & Safety]
Metal parabolic reflector provides more light output, wider and smoother beam. Microprism reflectors on the side allow oncoming vehicles or passers-by to quickly notice you at night, keeping you and others safe while driving.
Which Vehicles Is This Product Fit For?
Tip1: Search for vehicle year, make, model and installation location in our store.
Tip2: If you are unsure, please contact us via the message and provide the year, make and model of your vehicle. Let us know which products you are interested in so that we can check the accessories and get back to you as soon as possible.
How to install lights correctly?
Plug-n-Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.
Requires no Modification or Drilling.
1.Undo the screws, clips, or retainer springs that hold the light in place.
2. Disconnect the wiring from the assembly.
3. Detach the light from the vehicle to replace it with a new one.
4. Fit in the new light assembly.
5. Fix the new light into place and make sure that the screws, clips, or retainer springs are sealed.
6. Reconnect the wiring that was unplugged from the assembly.
7. Put back the grille and other components that you removed. Seal them back into place.
8. Test the new instruction is not included. Professional installer is highly recommended!
What are some common causes of light condensation?
1. Large changes in daily temperature.
2. Water vapor easily collects as dew point or humidity increases.
3. Leaking seals on bulbs and/or bulb sockets.This is a common occurrence and won't affect the light function.
HOW TO SOLVE?
1.Check that all vents are free from blockages. Turn on the low beam for 20 mins to raise the light temperature and evaporate condensation.
2.Remove bulbs to allow moisture to evaporate from inside the housing. Heat with a hairdryer or heat gun at a low temperature to speed up the process.
3.Leaking seals on bulbs or bulb sockets. Put moisture-absorbing silica-gel desiccant packet inside the light.
How to solve the problem that the light bulb does not work?
1.Check if the bulb is intact and replace it with a new bulb of the correct model. If you don't know the model,please contact us for confirmation.
2.Check if the wiring socket has water in it or is loose. You can unplug the corresponding function plug and plug it in again to observe. It may also be that the pins of the plug are in poor contact, resulting in no power. Check if the wiring is correct. If the wiring is normal, it may be a circuit board problem.
3.Check if the assembly wiring harness plug has retreated. The pins of the plug have retreated inward.
Item SpecificsBrand ECCPPManufacturer Part Number HK109808PP01Return Policy 30 Days Free ReturnPlacement on Vehicle Front Right LeftInterchange Part Number 25919067,25919066Superseded Part Number For 13-15 Chevy Malibu 16 Chevy Malibu LimitedLighting Technology HalogenHeadlight Style ProjectorHousing Color BlackLens Color ClearBulb Shape Code H1Fitment Type Direct ReplacementAssembly Type SealedBulbs Included NoManufacturer Warranty 5 YearsMounting Hardware Included NoShipping Country USCondition NewWater Proof YesComponents Included Lens and HousingLens Material PlasticFeatures SAE-CertifiedEasy&Hassle Free Returns YesFinish SmoothFitment Type Direct ReplacementComponents Included Lens and HousingNon-Domestic Product YesBallast Included No Item SpecificsBrand ECCPPManufacturer Part Number HK109808PP01Return Policy 30 Days Free ReturnPlacement on Vehicle Front Right LeftInterchange Part Number 25919067,25919066Superseded Part Number For 13-15 Chevy Malibu 16 Chevy Malibu LimitedLighting Technology HalogenHeadlight Style ProjectorHousing Color BlackLens Color ClearBulb Shape Code H1Fitment Type Direct ReplacementAssembly Type SealedBulbs Included NoManufacturer Warranty 5 YearsMounting Hardware Included NoShipping Country USCondition NewWater Proof YesComponents Included Lens and HousingLens Material PlasticFeatures SAE-CertifiedEasy&Hassle Free Returns YesFinish SmoothFitment Type Direct ReplacementComponents Included Lens and HousingNon-Domestic Product YesBallast Included No
PictureHot Item 2 Pcs Front Wheel Hub Bearings For Chevy Impala Buick Regal Lucerne LeSabre FWD USD 58.95 Pair Tow Mirrors For 2007-2014 Chevy Silverado Sierra Power Heated LED Signal USD 135.89 Front Wheel Hub Bearing Assembly For Chevy Impala Cadillac DTS Buick Lucerne FWD USD 41.37 Pair Manual Tow Mirrors for 1988-1998 Chevy GMC C/K 1500 2500 3500 Side Mirrors USD 70.89 For Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit USD 17.58 Shop CategoryStore Home Air Dryer Brake Dust Shield Car Tools◈Car Tools◈Electric Winch Tow◈Jack Stand◈Jumper Cable Catalytic Converter Cooling System◈AC Compressor◈Air Blend Door Actuator◈Blower Motor Resistor◈Condenser◈Coolant Tank◈Cooling Fan◈Evaporator◈Heater Support◈Thermostat Housing◈Water Pump◈Water Pump Impeller Copper Tube◈Brake caliper◈Brake drum shoe◈Brake lines kit◈Brake pad sensor◈Brake rotor pad◈Brake Shoe◈Power Brake Booster Crankshaft And Camshaft◈Camshaft & Crankshaft◈Harmonic Banlancer◈Timing Chain Kit Drive Belt And Device◈Primary Drive Clutch◈Serpentine Belt Tensioner Drive Shaft And Half Shaft◈4 Pcs Wheel Hub Bearing◈ATV/UTV CV Axles & Parts◈CV Axle◈CV Axle Boot◈Driveshaft◈Rear Wheel Axle◈Wheel Hub Bearing◈Wheel Hub Bearing Knuckle◈Wheel Hub Centric Rings◈Wheel Spacers Engine Bracket Glue◈Engine Mount Engine Gasket & Cylinder Head◈Cylinder Head◈Cylinder Piston Gasket Kit◈Head Gasket Set Engine mount Fuel System◈Fuel Injectors◈Fuel Pump Assembly◈Fuel Tank Pipe & Cap◈Mass Air Flow Sensor◈Motorcycle Carburetor & Parts◈Oil Fuel Hose Fuel Vapor Charcoal Canister◈Vapor Canister Gas Distribution System◈Hydraulic Lifter & Rocker Arms◈Idle Air Control Valve◈Secondary Air Pump◈Throttle Body◈Turbocharger◈Valve Cover Home gardening◈Courtyard And Outdoor Supplies Ignition System◈Ignition Coil & Spark Plug◈Ignition Coils◈Spark Plug◈Wiring Harness Inner Parts◈Air Cleaner Box Assembly◈Air Filter◈Car Floor Mats◈Cargo Cover◈Center Console Arm◈Remote Key◈Sun Visor Lawn Mower Parts◈Blade◈Deck Kit◈other◈PTO Clutch◈Pulley◈Spindle Light products◈Exterior Lights◈Instrument Panel Lights◈Interior Lights◈LED Headlight Assembly A◈LED Headlight Assembly B◈LED Headlight Assembly C◈LED Headlight Assembly D◈Led Headlights◈Side/Cab Marker Lights◈Third Brake LightsNew List Item Driver Side Sun Visor Light Gray For 2006-2008 Honda Civic 83280-SNA-A01ZE USD 20.19 For 2017-2021 Honda CR-V Roof Rack Cross Bar Cargo Luggage Carrier USD 65.69 4x TPMS Tire Pressure Sensor for Hyundai Elantra Tucson Santa 433MHz 52940-L1100 USD 36.59 4PC Tire Pressure Sensor 315MHZ For 11-17 Hyundai Kia Rio 1.6L 1.8L 529332G200 USD 33.89 Light Gray Sun Visor For 2006 Honda Civic Driver Left Side 83280-SNA-A01ZE USD 20.19 Pair Kit Halogen Headlights w/Bulbs For 2013-2015 Chevrolet Malibu Black Amber 100% Brand New!Fully sealed with solid silicone and designed with one-way vents to prevent moisture from entering the chassis. There is no need to worry about corrosion or moisture under any conditions.
2.[Impact Resistant & Tough]
Using durable polycarbonate lenses that provide good protection, cover imperfections and eliminate shock on the trails, the high-impact shell can also better withstand the shock and vibration of off-road risks.
3.[Brighter Lighting & Safety]
Metal parabolic reflector provides more light output, wider and smoother beam. Microprism reflectors on the side allow oncoming vehicles or passers-by to quickly notice you at night, keeping you and others safe while driving.
Which Vehicles Is This Product Fit For?
Tip1: Search for vehicle year, make, model and installation location in our store.
Tip2: If you are unsure, please contact us via the message and provide the year, make and model of your vehicle. Let us know which products you are interested in so that we can check the accessories and get back to you as soon as possible.
How to install lights correctly?
Plug-n-Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.
Requires no Modification or Drilling.
1.Undo the screws, clips, or retainer springs that hold the light in place.
2. Disconnect the wiring from the assembly.
3. Detach the light from the vehicle to replace it with a new one.
4. Fit in the new light assembly.
5. Fix the new light into place and make sure that the screws, clips, or retainer springs are sealed.
6. Reconnect the wiring that was unplugged from the assembly.
7. Put back the grille and other components that you removed. Seal them back into place.
8. Test the new instruction is not included. Professional installer is highly recommended!
What are some common causes of light condensation?
1. Large changes in daily temperature.
2. Water vapor easily collects as dew point or humidity increases.
3. Leaking seals on bulbs and/or bulb sockets.This is a common occurrence and won't affect the light function.
HOW TO SOLVE?
1.Check that all vents are free from blockages. Turn on the low beam for 20 mins to raise the light temperature and evaporate condensation.
2.Remove bulbs to allow moisture to evaporate from inside the housing. Heat with a hairdryer or heat gun at a low temperature to speed up the process.
3.Leaking seals on bulbs or bulb sockets. Put moisture-absorbing silica-gel desiccant packet inside the light.
How to solve the problem that the light bulb does not work?
1.Check if the bulb is intact and replace it with a new bulb of the correct model. If you don't know the model,please contact us for confirmation.
2.Check if the wiring socket has water in it or is loose. You can unplug the corresponding function plug and plug it in again to observe. It may also be that the pins of the plug are in poor contact, resulting in no power. Check if the wiring is correct. If the wiring is normal, it may be a circuit board problem.
3.Check if the assembly wiring harness plug has retreated. The pins of the plug have retreated inward.
