When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
VIN Code Simulator – Professional Solution
The VIN code is stored in the vehicle computer BCM, and most of them are readable but not writable, making it impossible to directly modify the VIN code string in the BCM.
Applicable application scenarios of VIN simulator:
Replace the driving computer BCM module: If the car is submerged in water, the BCM must be replaced. After replacement, the VIN code saved by the BCM does not match the nameplate frame number;
Upgrade and refresh the BCM module program: After upgrading and refreshing, it is possible that the VIN code in the BCM will also become new;
Manual input error: During vehicle registration, human error resulted in inputting the wrong VIN code;
Invalid VIN code: The checksum of the VIN code does not match the actual characters, resulting in the VIN code being unrecognizable;
Low configuration to high configuration: Many low configuration to high configuration conversions require the replacement of the BCM module, as the VIN code stored in the BCM cannot be modified;
The following scenarios are not applicable:
Modify the VIN code on the multimedia display screen: The VIN code on the display screen does not go through the OBD interface or diagnostic protocol, and cannot be modified by directly inserting it into the OBD; (Customization required)
Modify the VIN code on the car dashboard: The principle is the same as above, and the VIN code here is not displayed through diagnostic methods and cannot be applied; (Customization required)
Non standard CAN diagnostic protocols or manufacturer defined diagnostic protocols.
Please note that:
The VIN code simulator is suitable for solving the problem of VIN code mismatch, where the VIN code read by the diagnostic software does not match the actual VIN code on the nameplate.
Support TF card upgrade method, which can save shipping costs and shorten debug.
The United States included OBD testing in the inspection of in use vehicles in 2001 and required states to gradually incorporate OBD testing into the I/M system in 2002............
