When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dentistree USA
Best Pricing
Fast Shipping
High Quality
NPG for Yellow Gold Alternative - Dental Grade Made in USA 1 oz - 2oz - 5 oz
100% Rating
A popular non precious alloy for dental labs and grillz makers in the USA
Dental Grade and approved for the mouth
A yellow-gold colored alloy for construction of type 2 restorations. A premium, non-precious casting alloy for fixed crowns, bridges and onlays.
Offers the appearance and handling characteristics of precious Type III yellow-gold alloys, but at a fraction of the cost. Your laboratory will benefit from smooth and accurate castings, providing reliable quality and fit. Simple to finish, and soldering is fixed appliances, full cast crowns (FMC), single units, onlays, short-span multiple unit bridgework, metal sub-structure for veneer crowns using polymer resins (acrylic & composites), posts and cores.
Tensile Strength psi (MPa)
81,200 (560)
Yield Strength psi (MPa)
38,425 (265)
Elongation Percent %
15
Vickers Hardness HV1
140
Density Range °F (°C)
1,850-1,950 80.7% Al 7.8% Ni 4.3% Fe, Zn, Mn
Type
2
The sale of this product may be subject to regulation by the US Drug and Food Administration and state and local regulatory agencies. If so, offer on this item if you are an authorized purchaser. If the item is subject to the FDA regulation, we will verify your status an authorized purchaser of this item before shipping. You can contact us at Strident Inc, 11405 nw 122nd st Medley FL 33178
Payment
Shipping
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after purchasing, as that will allow us to post your item to you sooner!
We offer competitve shipping rates on all products.
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it very quickly.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30-60 days from the date you purchased it, depending upon the product.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Fast Shipping
High Quality
A popular non precious alloy for dental labs and grillz makers in the USA Dental Grade and approved for the mouth A yellow-gold colored alloy for construction of type 2 restorations. A premium, non-precious casting alloy for fixed crowns, bridges and onlays. Offers the appearance and handling characteristics of precious Type III yellow-gold alloys, but at a fraction of the cost. Your laboratory will benefit from smooth and accurate castings, providing reliable quality and fit. Simple to finish, and soldering is trouble-free. APPLICATIONS Non-ceramic fixed appliances, full cast crowns (FMC), single units, onlays, short-span multiple unit bridgework, metal sub-structure for veneer crowns using polymer resins (acrylic & composites), posts and cores. Tensile Strength psi (MPa) 81,200 (560) Yield Strength psi (MPa) 38,425 (265) Elongation Percent % 15 Vickers Hardness HV1 140 Density g/cm3 7.8 Color Yellow-Gold Melting Range °F (°C) 1,850-1,950 (1,012-1,068) Composition Cu 80.7% Al 7.8% Ni 4.3% Fe, Zn, Mn Type 2
Best Pricing
Fast Shipping
High Quality
Dentistree USA
NPG for Yellow Gold Alternative - Dental Grade Made in USA 1 oz - 2oz - 5 oz
100% Rating
A popular non precious alloy for dental labs and grillz makers in the USA
Dental Grade and approved for the mouth
A yellow-gold colored alloy for construction of type 2 restorations. A premium, non-precious casting alloy for fixed crowns, bridges and onlays.
Offers the appearance and handling characteristics of precious Type III yellow-gold alloys, but at a fraction of the cost. Your laboratory will benefit from smooth and accurate castings, providing reliable quality and fit. Simple to finish, and soldering is fixed appliances, full cast crowns (FMC), single units, onlays, short-span multiple unit bridgework, metal sub-structure for veneer crowns using polymer resins (acrylic & composites), posts and cores.
Tensile Strength psi (MPa)
81,200 (560)
Yield Strength psi (MPa)
38,425 (265)
Elongation Percent %
15
Vickers Hardness HV1
140
Density Range °F (°C)
1,850-1,950 80.7% Al 7.8% Ni 4.3% Fe, Zn, Mn
Type
2
The sale of this product may be subject to regulation by the US Drug and Food Administration and state and local regulatory agencies. If so, offer on this item if you are an authorized purchaser. If the item is subject to the FDA regulation, we will verify your status an authorized purchaser of this item before shipping. You can contact us at Strident Inc, 11405 nw 122nd st Medley FL 33178
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after purchasing, as that will allow us to post your item to you sooner!
Shipping
We offer competitve shipping rates on all products.
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it very quickly.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30-60 days from the date you purchased it, depending upon the product.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
High Quality
Fast Shipping
Best Pricing
A popular non precious alloy for dental labs and grillz makers in the USA
Dental Grade and approved for the mouth
A yellow-gold colored alloy for construction of type 2 restorations. A premium, non-precious casting alloy for fixed crowns, bridges and onlays.
Offers the appearance and handling characteristics of precious Type III yellow-gold alloys, but at a fraction of the cost. Your laboratory will benefit from smooth and accurate castings, providing reliable quality and fit. Simple to finish, and soldering is fixed appliances, full cast crowns (FMC), single units, onlays, short-span multiple unit bridgework, metal sub-structure for veneer crowns using polymer resins (acrylic & composites), posts and cores.
Tensile Strength psi (MPa)
81,200 (560)
Yield Strength psi (MPa)
38,425 (265)
Elongation Percent %
15
Vickers Hardness HV1
140
Density Range °F (°C)
1,850-1,950 80.7% Al 7.8% Ni 4.3% Fe, Zn, Mn
Type
2
