When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Bulk- in a white box- the same product from the last batch before the PSI factory in Pennsylvania shut down.Make your warcraft or any other character!
Make molds for casting for jewelry or other whatever.
Use it for repairs.
* #1 preferred sculpting putty since the early \'70s.
* Sculpt models and prototypes.
* Mixes in minutes.
* Long work life.
* Paintable No shrinkage; solvent and VOC-free
Kneadatite Blue/Yellow (\"Green Stuff\") is a two-part epoxy/polyamide sealant/adhesive for interior and exterior maintenance and repair. It has excellent adhesion to stone, ceramic, metal, wood and many plastics, including vinyl. Kneadatite Blue/Yellow Epoxy Putty Tape and BarsNicknamed \"Green\" by sculptors and modelers, Blue/Yellow is well-known for its long worklife, non-grainy texture and ability to hold fine detail. Cured models withstand up to 4 vulcanizations. Blue/Yellow is not intended for structural applications. Blue/Yellow is available in 2 forms: as a roll of side-by-side epoxy putty tape and as 2 round bars in a reusable plastic tube.
xable with no messy residue and no cleanup
• Applies and shapes like putty
• Ability to hold finest detail
• Tenacious adhesion to almost
any surface
• Solvent-, chemical- and water-
resistant
• Resists temperature extremes
• Interior or exterior use
• Long work life
• Solvent-free, no VOCs
• No shrinkage
• Will not corrode or rust
Kneadatite Blue/Yellow is a room-temperature curing,
two-part epoxy sealant for all types of interior and exterior
maintenance and repairs. When properly mixed together
to a uniform green color, it forms an industrial-strength
polymer compound for repair, modeling, and sculpting.
Once functional cure is reached, it can be drilled, tapped,
sawed, screwed, sanded, filed, and painted.
Kneadatite Blue/Yellow does not adhere to poly-
ethylene, polypropylene, or PETE and is not
intended for structural applications.
Sculptors using this product will find helpful tips and
information in our Sculptor’s Information Sheet available
on our website at DATA*:
APPLICATION TEMPERATURE LIMITS
41°F to 98.6°F (5°C to 37°C)
WORK LIFE AT 75°F (24°C) 1.5 to 2 hrs
SHELF STABILITY AT 75°F (24°C) 12 months
CURE TIME TO SHORE D 30 4 to 5 hrs
CURE TIME TO ULTIMATE HARDNESS 24 hrs
SHORE D HARDNESS AT FULL CURE (24hrs) 60
LAP SHEAR TENSILE STRENGTH
On steel (1\" x 1\" x 1/16\") 500psi
NON-VOLATILE CONTENT 100%
SHRINKAGE Less than 1%
SERVICE TEMPERATURE LIMITS
Continuous -40°F to +250°F (-40°C to +121°C)
Intermittent -40°F to +300°F (-40°C to +149°C)
CHEMICAL RESISTANCE
Resistant to hydrocarbons, ketones,
esters, alcohols, halocarbons, aqueous
salt solutions, dilute acids and bases
*Not to be used for specification purposes
Conforms to ASTM-D4236
Use instructions
Before applying, roughen and clean the area to be repaired. Then
follow these easy steps:
1. Twist off or cut across the Blue and Yellow tape, removing an
appropriate length or your job. Any equal length of tape contains the
correct mixing proportion of the base to the curing agent. If using as a
sculpting compound, it is recommended that you mix only the amount
needed for 1 hour of sculpting. Kneadatite Blue/Yellow will adhere to
itself; so more putty can be mixed and applied later.
2. 3. Mix by twisting and kneading to a uniform green color.
Apply to the surface within 1 hour of mixing. Force into cracks or holes.
Mold to desired shape, and strike off excess material before
hardening begins, preferably with a tool moistened with water. When
applying to a damp or wet area, work the material forcefully into the
surface and apply pressure until adhesion begins to take effect
For best results: For easier mixing and to smooth application, moisten
fingers with clean water. Remove excess material before hardening begins.
Curing: Kneadatite Blue/Yellow has a 1.5- to 2-hour work life. Functional
cure occurs after 4 to 5 hours, when the application can be sawed, drilled,
carved, sanded, and painted. To speed hardening, application may be
placed under a warm lamp (95°F/35°C max.); warming in an oven is not
recommended.
Note to sculptors: Kneadatite Blue/Yellow can be mixed at different rations
to achieve various sculpting properties (faster/harder cure vs slower/softer
cure). More details can be found on the Sculptor’s Information Sheet on our
website.
