Iron Rock Off Road Hack \'n Tap Slip Yoke Eliminator Kit For Sale

Iron Rock Off Road Hack \'n Tap Slip Yoke Eliminator Kit Welcome to Baja Racing Supply

• Store Home
• Items For Sale

• Store Home
• Items For Sale
• response
• Contact Us

• response
• Contact Us

Iron Rock Off Road Hack \'n Tap Slip Yoke Eliminator Kit

Product Description

NOTE: If ordering a custom length driveshaft with SYE, you will need to install the SYE first and then call us with your driveshaft length. Do you want to run 4.5\" of lift or more on your Cherokee?
Does your lifted Cherokee have a vibration during accelerating or when driving at highway speeds?
Do you need a slip yoke eliminator to ensure vibration free highway driving?
Do you hate transfer case drops because they solve vibrations, but rob ground clearance?
Do you want to add 1\" more ground clearance under the belly of your Jeep where you need it most?
Did your lift kit come with plastic transfer case drop spacers and you\'re a little nervous about that?
Do you just hate slip yokes? I mean really, what was Jeep thinking?
Are you on a tight budget?If you answered yes to any of these questions, then once again Iron Rock Off Road has the perfect solution for you: our hack-n-tap slip yoke eliminator kit for your Jeep. We have put together a budget friendly solution to your driveline vibrations. With this kit, we provide a new yoke for your transfer case, mounting hardware, and step by step installation instructions. Installation takes only 1-2 hours and does not require opening your transfer case.Your friends may tell you that this solution isn\'t as strong as a heavy duty slip yoke eliminator kit with a new 32 spline output shaft. This is true; our hack-n-tap kit retains the stock 27 spline output shaft, however people have been wheeling very successfully on the stock 27 spline output shaft for many years. Of course if you want the the heavy duty version check it out here, but if you want a budget friendly permanent solution click \"add to basket\" and we\'ll ship one out to you right away. You know you want one!! Get rid of that clearance robbing t-case drop and having nothing standing in the way of lifting your Jeep as tall as you want to.Why do you need this kit?

• Cures driveline vibration caused by lifting a Cherokee 4 1/2\" or more.
• Allows you to remove your transfer case drop, gaining you 1\" of ground clearance or more, right under the belly of the beast where you need it most! This also moves your transfer case further away from the rocks and allows you to raise your t-case skid plate (if equipped).
• Great for running a lower lift heights to avoid dropping your transfer case.
• Wow, it\'s so inexpensive!
• Great for tall lift kits where a transfer case drop just isn\'t enough.
• Installation is easy compared to kits that include a new output shaft.
• It just plain works great!
• You can often use another XJ front driveshaft with this yoke! That means your front and rear driveshafts will be identical!

Kit includes:

• 1310 CV transfer case yoke
• Installation hardware
• Detailed Installation All 96 and newer XJ Jeep Cherokee\'s and 95 and older XJ\'s when using the seal flange (sold separately as an option above)
• *231 transfer cases with the 3 hole mounting seal housing will need the seal flange sold as an option above. This is typically found on older 231 cases(generally pre-1996). If you are not sure, please look at the back of your transfer case before ordering. If you are still unsure after looking, please call us.
• older style
• Older style - the seal flange is needed
• with this style (must have 3 hole rear
• cone)
• newer style
• Newer style - seal flange not needed
• with this style.

• ZJ and WJ Grand Cherokee 242 transfer cases
• Verify your 242 case has the 27 spline output shaft. These applications will require a custom length driveshaft. Please call us for details.
• ZJ and WJ Grand Cherokee 247/249 transfer cases
• These applications use a case hardened output shaft in the transfer case. This can make it difficult to drill and tap successfully without the proper equipment. A custom length driveshaft will be required for this application as well.
• Fits vehicles that have the AX-5/AX-15 manual trans. A custom shaft could be necessary in these vehicles.
• Other Fitments: NP233C

IMPORTANT NOTES:

• Cutting, drilling, and tapping required. 3/8-16 hand tap, 1/4\" and 5/16\" drill bits required. The transfer case output shaft is case hardened, so be sure to cut off the entire pilot hole (or you will need a caroffere drill bit).
• WHAT DRIVESHAFT TO USE: This kit is designed to use a factory front Jeep Cherokee driveshaft. A factory XJ front shaft can be found at your local salvage yard for as low as $15! Iron Rock Off Road also sells this kit with the option of adding a brand new custom heavy duty driveshaft. This option can be found in the drop down list at the top of this product page.
• XJ\'s with over 6.5\" lift may require a custom driveshaft. To be certain, you must measure per the instructions. If you are not sure if this will work on your Jeep, please measure per the instructions before ordering.
• Not all XJ\'s have the ability to utilize the front driveshaft in the rear. Please review the instructions prior to installation.

Fast & Secure Shipping30 Days Moneyback24/7 Customer Support100% Satisfaction By All Categories About Baja Racing Supply

BAJA RACING SUPPLY started in the fall of 2011 in Yuma AZ. We opened our first brick and mortar store, occupying approx. 250sq feet of retail space. Carrying just a few products, we quickly outgrew the space, needing to carry more products, and a larger show room.

In the summer of 2012 we moved into our second location. That space was 2400sq/ft facility with approx. 1100ft of retail show room and 1300ft of fabrication space. We are currently running as aninternet and phone order only shop.

We are set to break ground in the fall of 2025 on our brand new 6,400sqft facility! This new space will allow for increased inventory, faster turn around times and massive room for expansion in products and services!

Contact Us On ReturnsShippingpayment

If you change your mind, or the product is not suitable, then you can return the item for a refund within 30 days. We only accept the unopended/unused products. All postage and package costs remain the responsibility of the customer unless we delivered an item to you in error, or the item is damaged or faulty.

CUSTOMER SUPPORT: We guarantee 100% satisfaction on all purchases. Please, contact us if you have any problems with your order before opening a case or leaving negative response. Our team will do our best to solve any issue.

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider shipping date estimates may appear on the shipping quotes page. Please note that with shipping timelines are estimates and are not guaranteed. We do our best to meet the deadlines, however occasionally things happen outside of our control.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound. These rates generally only affect AK, HI, PR, Guam and any expedited orders.

Baja Racing Supply LLC ships all packages UPS, USPS, FedEx and occasionally via freight truck. Please allow extra shipping time around holidays as shipping companies often observe them.

We accept PayPal, and all major credit cards and debit cards. Please message us for details if needed.

Core Values for Baja Racing SupplyCustomer-FirstQuality ProductsFair PricingExpert SupportTrustworthy RelationshipsCommunity FocusedContinuous GrowthPassion for the SportWhy Customer love us ?“Good price and fast shipping. Very good customer service “Buyer: A***K (857)“great product, fast shipping. Highly recommended seller“Buyer: E***S (835)“Great communication! Great price! Awesome store! “Buyer: H***E (77)“As always great parts .great price.Fast shipping“Buyer: 8***V (47)view all reviews

• Store Home
• response
• Items For Sale
• Contact Us

© Copyright 2025, Baja Racing Supply. All rights reserved.Made with by shopdesign.org