Huepar 4D Laser Level Self-leveling & LCD Screen Remote Control S04CG + Tripod For Sale

• Ship to the world

• ✔️4 X 360° WITH TOP & FLOOR LINE LASER: This laser tool provides four 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation. The 360° floor horizontal line is for tiling installation. With the lifting base, the 360° floor laser can raise from the surface to project over and travel past uneven surfaces or obstructions between 1\" and 3.54\" height. Two 360° vertical lines cross at 90°angles makes user quickly visualize and finish square layout.
• ✔️LCD DISPLAY&BLUETOOTH TECH: The laser level has LCD screen to easily get the status of the battery, angle, pendulum and pulse mode on the display. Bluetooth connectivity enables to control the setup of the laser from across the room with Huepar App on smart phone and remote control. The App and remote control can switch ON/OFF the laser lines and pulse mode, select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices simultaneously.
• ✔️TRIPLE POWER METHODS&TYPE-C CHARGING PORT: This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery (can be purchased easily at local market) for extended run-time, or with 4 AA alkaline batteries. Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc.
• ✔️MULTIFUNCTIONAL LASER TOOL: The four 360° laser planes can be selected individually by separate H and V button on the keypad. With smart pendulum, the laser tool self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±3.5°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG.
• ✔️MAGNETIC BRACKET&DURABLE DESIGN: Strong magnetic bracket allows for quick positioning to metal surfaces to hang the laser tool for wall applications.The laser offers 1/4\"-20 mount thread to suit a standard tripod or pole mount. Over-molded metal laser window with IP54 water/dust resistance withstands tough job site conditions and can be removed and replaced with a screwdriver. The kit has a hard carry case bringing much more convenience to carry and store the laser tool.

Huepar S04CG 16 Lines 4D Green Laser Level Specifications:

● Laser Beam: Green Beam

● Screen type:LCD screen with backlight

● Projection: 16Green Laser Lines

● Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output

● Laser Wavelength: Germany Osram 505nm-520nm

● Horizontal/Vertical Accuracy:±2mm/10m, ±1/13 in. at 33 ft

● Leveling/Compensation Range:3.5°±1°

● Leveling Time:≤3s

● Working Distance:≥20m, ≥40m with detector

● Working Time: About 5 hours with li-ion battery, About 0.5 hours with AA battery

●Power Source:7.4V/2600mAhLi-ion battery& 4 x AA battery

● Mount Size: 1/4\"-20

● IP Rating: IP54, waterproof, dustproof and shockproof, reliability and robustness

● Operating Temperature: Between -10℃ and +50℃

● Storage temperature: Between -20℃ and +70℃

Line Switching:

Since there is a lever type leg lock, it can stretch in four stages.

Also equipped with a gear type elevator for crank handle operation, even when you want to further height, fine adjustment can be done easily.

If you loosen the handle and loosen it, you can adjust it to vertical 90 ° horizontal 360 °. The quick shoe plate can also be tilted by 90 °. During operation, the tripod does not move, you can easily check the position.

The 3-Way Flexible Pan Head Provides 360 degree Rotation Panoramas. The Built-in Bubble View Level can help you adjust the angle and accuracy.

Copyright © Huepar. All rights reserved.