About the item:
Large 12" x 15" transfer element - The 12" x 15" (38X30cm) heat platen provides a big surface to transfer onto flat surfaced items such as T-shirts, ceramic plates, mouse pads, jigsaw puzzles etc.
Digital LED controller - Preset the desired temperature and timer. Intelligent audible alarm after the transfer done.
Full 360-degree rotation of swing-away design - Allows the heating element to be moved safely aside and reduce the chances of accidental contact.
Full-range pressure-adjustment knob - This allows the pressure to be adjusted according to the thickness of the material you are transferring to.
Teflon-coated platen press element - The surface is non-stick, preventing scorching of transfers, and does not require a separate silicone/teflon sheet.
2 4/5" Long arm handle - Comfortable rubber grip for everyday use and long production runs.
Detachable lower platform - It is elevated with dual supports. Easily exchange to other elements.
Adjustable multi-spring balancer - Allows pressure to be more evenly distributed across the entire platen when it is closed.
4/5" thick heating board - Built-in structural support to maintain flatness. Warm up quickly and offer even heating.
Upgraded aluminium alloy cradle - Detached cradle for use of the mug elements. Compact size and lightweight, as compared to standard mug heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined .It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special setting:
Press“SET”, the upper display will showing “SP”, and the lower of displaywill showing the temperature of last setting. Then enter intotemperature setting option, press + or - (increase or decrease) to setthe needed temperature. After setting well, please press “SET”, theupper display will show “SK” to go on the next step for time setting.
Time setting:
Press“SET” again, H1 LDE will showing “ST”, then enter into the timesetting. Press + or - (increase or decrease) to setting the needed time.(Normally the time is 180 seconds for mugs and 15-20 seconds for tshirt printing)
Fault diagnosis and solution:
1. If the controller box showing nothing when power on, there are 2 solutions:a. Please check the fuse wire, checking the glass wire to see if thewire damaged or fusing, if damaged, please change the wire.
b. open up the back cover of controller box, and examine theelectricity box,to see if some thread fall off or not, if fall off,please match it accordingly.
2. When power on, if the controller display showing 3 lines, pleasetake out the heating platen, and replaced it with another heating panel,or mug heater. If the display is normal, then maybe is the secondsituation of “b”, the thread wire were disconnect. If still showing 3line, then is the first situation of “a”, the socket wire were fall outor break.a. Checking the inner wire of controller box, the white metal socketwith 4 lines, please check if the thread is break or disconnect, ifdisconnect, please match it accordingly or replace it.
b. Checking the wire of heating panel , the red cycle is showing theends of the cable, one end is 3 thread, please replace 2 thread will beokay.
3. When power on, the controller box showing values but cannot heatingup: the display showing the actual room’s temperature, please takes outthe plug of head machine, and replaced it with other mugs heater orplate heater. If temperature is heating up normally, then will be thenext situation “a”, if cannot heat up, will be “b”situation.
a. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok.
b. Open up the back cover, and examine the thread to see if some threaddisconnected or break, if disconnected, please follow the above “a”, ifnothing showing, please following “b” to maintenance. If no break, thenreplace the controller box.
4. The head controller box heating up normally, the other parts will benot heating up, please change the heating part directly.
5. The head machine’s function is ok, but cannot count down, thenplease press the third button, this machine will count down. If stillcannot count down, please replace the controller box.Advanced Characters:
Fahrenheit and Celsius scale are selectable
Adjustable multi-spring balancer
Allows pressure to be more evenly distributed across the entire platen when it is closed
4/5" thick heating board
Built-in structural support to maintain flatness
Warm up quickly
Offers even heating
Upgraded aluminium alloy cradle
Detached cradle for use of the mug elements
Compact size and lightweight, as compared to standard mug cradles
Specification- Brand : FANSDEALONLINE
- Model : Heat Press Machine
- Dimension : 15 1/4"L x 15"W x 17"H
- Platen Press : 12" x 15"(38X30cm)
- Hat/Cap Press : 6"x 3"(curved)
- Mug Press #1 : 2"-2.75" diameter (6OZ)
- Mug Press #2 : 3"-3.5" diameter (11OZ)
- Mug Press #3 : 12OZ latte mug (Cone)
- Mug Press #4 : 17OZ latte mug (Cone)
- Plate Press #1 : 5" max diameter
- Plate Press #2 : 6" max diameter
- Temperature range : 0 - 480F (0 - 250C)
- Wattage : 1250W
- Power input : 110V
- Cord length : 4.5
- Adjustable height : 13 1/2" to 17"
In The Box- 1 x Fully-assembled machine with platen press
- 1 x Hat press
- 4 x Mug presses
- 2 x Plate presses
- 1 x Removable silicone pad and cotton pad
- 2 x Teflon Sheet
- 1 x Operating Manual
Features- Large 12" x 15" (38X30cm) transfer element
- Digital LED temperature and time controller
- Full 360-degree rotation of swing-away design
- Fahrenheit and Celsius scale are selectable
- Full-range pressure-adjustment knob
- Teflon-coated platen press element
- 2 4/5" Long arm handle
- Detachable lower platform
- Adjustable multi-spring balancer
- 4/5" thick heating board
- Upgraded aluminium alloy cradle
- Metal and plastic construction
- Built-in fuse for safe using
- Adjustable feet for unevenly floor
- Combo type, it could transfer images to T-shirt, mug, plate, cap and so on
- Digital control ensures the high precision and sensitivity
- The changing among the spare parts is available when necessary
- High precise automatic digital tempreture indicator
- Heating coil and heating panel are integrated, safe and durable
- Issues with certain thickness can also be transferred
- Adopting advanced technology and good material for better effect
- Swing-away design and more even pressure guarantees your perfect printing
- CE approved
- Lifetime warranty
- T-shirts, cups and hats are NOT included
DeliveryWe have Two warehouses located in CA, and NJ, and the item will be shipped from one of them according to your location, and only to ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave note if the changes are needed before we send the product.
SHIPPING1. We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them, and only to ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave note if the changes are needed before we send the product.
2. It is beyond our ability to change the address after we ship your item.
3. Orders placed at weekend will be shipped within 2 days.
4. USPS: 3-9 business days. | UPS: 2-6 business days. | FedEx: 2-6 business days.
5. We only ship to the 48 states, and we do not ship to FPO or APO addresses.
RETURNWe accept returns. Please contact our customer service team immediately if:1.You changed your mind and wish to request a return.
2.Your product was damaged during transit.
All returns must be directed through Customer Service. Please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees and a 10% re-stocking fee will be deducted from your refund in cases where you changed your mind about your purchase and wish to return the product. This also applies to orders cancelled while in transit.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
We will require a picture of the damaged part for verification.
The buyer will be liable for the shipping costs associated with warranty claim.
WARRANTYFor your peace of mind, this product comes with lifetime warranty. We value our customers and wish to make your purchase experience as enjoyable as possible. If something goes wrong with your product, please do not hesitate to contact us for assistance.
Please contact us through and include the original purchase information (i.e. your name , address, email and purchase receipt number).
PAYMENTWe accept Paypal payment only.
Payment should be completed within 4 (Four) days of sale closing. Or unpaid dispute will be filed for closing sale.
