When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dana 44 Chevy/Jeep Cross Over/ High Steer . The Kitis Complete and also comes with DOM Tubing, Passenger Side and Driver Side Knuckles
Knuckle is made in USA by East West Off Road
Arms are made with Domestic Billet Blocks and Machined by American Workers to ensure a Life Time Warranty. Arms are Whooping 1.25” Thick with 4 Holes Styleto Suit Reid Knuckles, Solid Knuckles, Stock Knuckles or any other After MarketKnuckles.
Tie Rod Ends aremade Metal to Metal with Spring Technology way beyond any Expectations.
Kit Includes:
1 - Dana 44 Driver Side Flat Top Knuckle from EWO (Black Powder Coated)
1 - Dana 44 Passenger Flat Top Side Knuckle from EWO (BlackPowderCoated)
1 - Driver Side Arm (1.25" Thick) Tapered for 7/8" Chevy 3/4 Ton Tie Rods
1 – Passenger SideArm (1.25” Thick) Tapered for 7/8” Chevy ¾ Ton Tie Rods
1 – 54” x 1.50” x.250” DOM Tubing Length
1 – 43” x 1.50” x .250” DOM Tubing Length
1 – ES 2026 R DragLink End with Grease Fitting, Castle Nut and Cotter Pin
1 – ES 2027 L DragLink End with Grease Fitting, Castle Nut and Cotter Pin
1 - ES 2234 L Tie Rod End with Grease Fitting, Castle Nut and Cotter Pin
1 - ES 2234 R Tie Rod End with Grease Fitting, Castle Nut and Cotter Pin
8 – Chromoly 9/16”Studs
8 – Conical Washers
8 – Lock Nuts
2 – 7/8 – 18 LeftInserts/Tube Adapters/ Weld Bungs
2 – 7/8 – 18 RightInserts/ Tube Adapters/ Weld Bungs
2 – 7/8 – 18 LeftJam Nuts
2 – 7/8 – 18 RightJam Nuts
1- 4" Drop Pitman Arm with 32 Splines Fully Indexed 2 - Upper Ball Joints 2 - Lower Ball Joints
2 - Upper Ball Joints
2 - Lower Ball Joints
Please Note: DOM Tubes will be shipped via UPS Ground and all other parts will be shipped via 2 x USPS Priority Mail Boxes
