FLIR Boson OEM LWIR Thermal Imaging Camera 6.2mm f/1.0 60Hz Core Module *** READ For Sale

This listing is for1 piecegenuineFLIR Boson OEM LWIR Thermal Camera Core Module
6.2mm f/1.0 – 60Hz LensRemoved from an OEM industrial / thermal imaging system.
Unit designed for industrial, robotics, inspection, and thermal fusion applications.
This is NOT a consumer camera, NOT USB, and NOT a plug-and-play device.Key Features:* Manufacturer: FLIR
- Type: OEM LWIR Camera Module
-LWIR: Long-Wave Infrared
- Lens: FLIR 6.2mm f/1.0
- Frame Rate Marking: 60Hz
- Internal FLIR PCB: 250-0656-09-R230
- Internal Flex PCB: 250-0741-00 Rev 110
- Camera marking: 20640A075-6PADK
- Genuine FLIR-branded internal electronics
- OEM / embedded integration configuration
- Specialized industrial camera assemblyApplications
Suitable for qualified engineers, developers and integrators working with:
- Thermal / infrared imaging
- Robotics & autonomous systems
- Machine vision
- R&D / engineering development
- Industrial imaging systems
- OEM replacement / integration projectsCondition
- Unit is in good physical condition and was removed from OEM equipment.
- This is an OEM engineering component and is NOT a consumer USB camera or plug-and-play device.
- Proper interface hardware, power, software and technical knowledge may be required for operation.
- Lens and optical surfaces appear clean and intact
- No visible physical damagePlease review all photos carefully for exact configuration, connectors, part numbers and condition.
You will receive 1 camera module as shownSome photos in this listing show the unit partially disassembled for demonstration and identification purposes only, in order to clearly display internal connectors and components.
The item shipped to the buyer will be an original, unopened, unmodified unit in its original assembled condition, exactly as removed from the OEM system.--- IMPORTANT ---
Integration / Usage Information
This camera core is designed for system integration and requires a compatible carrier board or host system.
• Output interface is via OEM board-to-board connector
• Not USB / HDMI / Ethernet
• Intended for use with compatible embedded platforms (e.g. OEM host board, robotics system, thermal imaging system)
• No datasheet, pinout, firmware, or driver is providedThis is standard for OEM and industrial camera cores.
Professional or engineering knowledge is recommended.Intended Applications
• Industrial system replacement
• Robotics and autonomous platforms
• Thermal + visible imaging fusion systems
• Engineering evaluation, R&D, OEM integrationQ & A
Q1: Is this a genuine FLIR module?
A: Yes. The camera contains FLIR-branded optics, PCBs and internal components. Please see the detailed internal photos.Q2: Is this an LWIR thermal camera?
A: The OEM identification label specifically identifies the assembly as “LWIR CAM,” and the internal camera components are FLIR branded.Q3: Is this a FLIR Boson?
A: The internal architecture and components are consistent with FLIR OEM/Boson-family hardware; however, this is an OEM-integrated assembly rather than a standard retail Boson camera. Please verify compatibility by the photos and part numbers before purchase.Q4: What lens does it use?
A: The installed FLIR lens is marked 6.2mm f/1.0.Q5: Can I connect it directly to USB?
A: No. This is an OEM engineering module and is not a plug-and-play USB consumer camera. Additional interface hardware/software may be required.Q6: Has it been fully function-tested?
A: The unit has been visually inspected and opened for component identification. Unless otherwise stated, full thermal video output has not been independently tested, so buyers should purchase based on the documented configuration and photos.Returns & Inspection Policy (-Compliant)
Buyer has agreed to purchase these units in AS-IS condition and NO Return
By purchasing this item, the buyer acknowledges and agrees to these terms.
This order is for 1FLIR OEM Camera Core Moduleonly (as pictured), no other accessory is included
Ship from California warehouse
All trademarks, service marks and company names are the property of their respective owners.