When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Free Tool Kit Requirement
Size of 4”x8”DO NOTcome with Tool Kit
Size of 12”x60” Include 1 set of Basic Tool Kit
Size of 24”x60” and above Include 1 set of Deluxe Tool Kit
Limited1 Setof Tool Kit for each Account ONLY regardless of quantity purchase
Deluxe tool kit will be given if 12"x60" and 24"x60" or above are purchased together
Protection
TPH PPF (Paint Protection Film) ECO for your vehicle. Waterproof and designed with self healing and UV protection properties. Protect your vehicle’s paint or surface, and help keep that brand new look. Help protect vehicle from normal road wear and tear such as chips, scratches, debris, sandblasting, and gravel impact.
Mirror Smooth Finish
Protection should be indistinguishable from factory paint.Heat Activated Self-Healing Topcoat
Constructed from an elastomeric polyurethane material (TPH), it will self-heal light scratches & swirl marks with a light heat application to the film's surface.Non-Yellowing
Our proprietary film formulation will not yellow from UV exposure, ensuring protected areas are nearly invisible.Discoloration & Stain Resistant
Don't worry about specs, spots, or splotches from contaminants. It is stain resistant & will maintain clarity under the harshest conditions.Prevents Wear & Tear
7.5mil thickness. Stop rock chips, nicks & scratches in the paint, and keep your vehicle looking as good as the day it rolled off the lot.Edge Seal Technology
Lifting & delamination are a thing of the past. Our signature technology ensures film stays stuck & keeps surfaces protected from contaminants.
Installation:
1) Cut the film according to the size of the lamp. The side length of cut should be more 5cm than the lamp size for convenient to install.
2) Clean up the surface of lamp, spray a small mount of water on it.
3) Open the film and spray a small mount of water on it.
4) Straighten the film and stick it on the lamp.
5) Flatten the area with bubbles with a scraper.
6) It can be heated by dryer, and the effect is better for curved shape lamp. Then flatten the curved area with a scraper.
7) Cut off the excessive film along the brim of lamp with cutter.
On Jan 14, 2026 at 12:07:12 PST, seller added the following information:
