When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This unit mount, which I 3D printed is to protect your Dual XGPS160 SkyPro model GPS from water & mud. It has a semi-clear top and a gasket for the cable to keep high-pressure water out of the unit.
I made it to keep mud out of your unit and out of the sun. It is not waterproof but is water resistant with drain holes in the base if it happens to get wet from rain or splash but it will keep the water out of the power switch as it is not waterproof as I have found out.
It will come with a tube mounting base with Velcro strap that comes with it, or you can put always install it using any type of double stick tape if you like on the flat base that I also supply.
This model fits only the USB MINI B connector, and not the newer Type C connector!
If you need the Newer TYPE C cable model, I have it listed in my other The GPS unit DOES NOT come with the protector!
