When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This particular *kit is for a three fan unit meant to cool your cabinet, multimedia center, aquarium, home grow op, brewing project or whatever else that may need cooling, the only limit is your imagination!These fans move a combined 138 cubic feet (WxHxD) of air per minute (CFM) which is good for 2-6 components (up to 20 cubic feet of space with 2-4 shelves), this is just a general rule of thumb and it assumes you have adequate space for air to flow in from, and ventilation between shelving, we\'re currently working on an in depth guide to airflow and cooling however in the mean time if you have questions we\'re here to help you!
Can be mounted on any side of a cabinet, where room permits (cutout dimensions below). Insert completed cooler assembly in hole and attach with appropriate screws. Fan can be set to be either an intake or exhaust, simply mount the fan to the bracket pointing in the desired direction before installing (if you are looking at the label the air will flow towards you)If you need additional information you can contact us!
Includes:(3)**Ultra Quiet & Reliable Coolerguys Dual Ball Bearing 120mm 3pin 12v FanWith Dual Ball Bearings this Fan is rated to last 50,000+ hours running 365/24/7 (Nearly 6 years!)The fan has a 30\" (760mm) long cord, if you need to extend this length we have extensions here
(1) Coolerguys Pre-Set Thermal ControllerThis controller comes with a 24\" (610mm) long probe, place where you\'d like to monitor the temperature, when the temperature reaches 88F (31C) the fan and anything else plugged into the unit will be activated until the temperature falls below 81F (27C)It natively supports up to 4 3pin connections (12v only) but can handle more with the appropriate splitters (maximum 1.5A)Temperatures above are (+/- 1° F)
(1) Coolerguys 2A 100-240V AC To 12V & 5V DC Power Supply with 4pin Molex plugThis is how the fan and thermal controller can run from a standard wall socket, since it is 100-240V AC it can be used in any region if you use the appropriate plug, this kit ships with a standard US 2 prong plug.
All necessary screws, cables, and fasteners are included to assemble, install and operate this unit.If you\'d like to add additional brackets and fans to this kit you can find them here, non-thermal controlled kits only have enough ports for the fans which come with it, the standard thermal controlled and programmable controllers have 4 native ports, if you need more ports for fans we have adapters here
Completed Fan and Bracket Dimensions when assembled using the included parts:17.75\" x 6.5\" x 1.38\" (159 x 450 x 35mm)
Cutout size:16\" x 5\" (400 x 130mm)
Total Kit Contents:(1) Coolerguys 100-240V AC To 12V & 5V DC Power Supply With 4pin Molex(3) Coolerguys Ultra Quiet 120x120x25mm Dual Ball Bearing Low Speed Fan(1) Acrylic Bracket(1) Coolerguys Pre-Set Thermal Controller (Rev4)(3) Black 120mm Honeycomb Mesh Fan Grill(3) Black 120mm Fan Grill(24) Fan nuts and bolts(6) #6 - 1/2\" black Cabinet screw
*This is a kit and some assembly is required.**Fan Specs:1200 RPMOperation Voltage: 6.5~13.8 VoltsInput current: 0.30 Amp MaxThermal COperation temperature: -10 to +65 CStorage temperature: -40 to +70 CRPM: 1200 +/- 10%CFM: 46dB: 20.4Lifespan is based on the operating temperature of 95F (35C)
