When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Outside Solvent-Based Acrylic is a durable exterior concrete sealer designed to protect and enhance decorative surfaces with a low-to-medium gloss finish. It offers UV protection, non-yellowing performance, strong adhesion, and resistance to salt, chemicals, and hot tire pickup. Ideal for driveways, pool decks, and residential or commercial surfaces, it provides long-lasting protection against outdoor wear and weather exposure.
Coverage: 200-400 square feet per gallon. Coverage varies with the surface texture of the concrete, temperature of the concrete, and ambient conditions.
Surface Prep: Concrete must be clean and free of dirt, dust, oil, grease, mold and mildew, and any other contaminants.
RAC Stained concrete must be neutralized, thoroughly cleaned, and dry prior to sealing.
WRC & TSC/Active Elements Stained concrete must be completely cured prior to sealing.
Application: Application Tools Pump sprayer, Airless sprayer or Roller & Brush
Preferred Method – Spraying Protect surroundings with masking paper, masking plastic, or spray shield. Always use a filter when pouring into a sprayer. Use only high quality industrial grade solvent resistant spray equipment. Concrete surface temperature must be between 50 - 90 degrees (F).
If rolling Concrete Resurrection - Outside Acrylic CR-561 , work material into a wet edge, and avoid excessive back rolling. When applying two coats, roll the second coat perpendicular to the first.
Drying Times:
- Drying Time Dry to touch: 15-40 minutes
- Recoat: 30-40 minutes
- Light Foot Traffic: 3 hours
- Heavy Traffic: 48-72 hours
Dry times are for 75 degree (F) temperatures and medium humidity. Low temperatures will slow drying and curing time. Do not apply if rain is expected within 3 - 6 hours.
