When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Complete Power Steering Rack and Pinion Tie Rod For Chevy Silverado Sierra 1500
Items Description:
Type:Power Steering Rack and Pinion&FrontOuter Tie Rod End
Condition: New
Manufacturer Warranty: 1Year
Fitment Type:A new product of good quality that is easy to install and serves as a direct replacement
Interchange Part Number:
15254062, 19133646, 19133648, 19153072, 19153073, 19153074, 19178559, 19207489, 19207491, 22-1036, 22-1145
Note:
1.Orders are usually shipped within 24 hours after your payment(except weekends & official holidays). You can log on to to check your logistics tracking number.
2.Please make sure to provide us with correct, precise and detailed shipping address before purchase, and cannot change it once purchased.
3.Please confirm the product images, title, and part number before Purchase.
Built:
Built to strict quality control standards 100% factory tested.
High Performance:The steering rack solves abnormal noise and oil leakage problems, ensures that the steering wheel rotation angle is proportional to the tire rotation angle, and reduces the steering wheel's control force when turning, which makes driving safer.
2 in 1 Function:Conversion of the steering wheel's rotationalmotion into the linear motion needed for thevehicle's wheels to turn
Reduction of gears, which makes it easierfor the steering wheel to turn the wheels.
Premium Material:With the premium aluminum alloy and steel construction, this steering rack assembly has a great anti-rust and anti-corrosive quality for its long service life.
We put moderate lubricating oil into this assembly so that it can prevent rust and oxidation.
Humanized Design:Ensure a tight seal and smooth steering operation. The hydraulic lines are fully fluid tested at high pressure. And the steel clamps and rubber bellow boots improve steering efficiency.
Attention:
1.Put the wheels in a straight-ahead position
2.Crack loose all the wheel lug nuts
3.Raise and support the vehicle with approved jack stands.
4.Remove both front wheels.
5.Remove the Steering Shaft Coupler Outer Seal and unbolt the upper pinch bolt on the Steering Shaft Coupler assembly
6.Detach the outer tie rod ends
7.Remove any parts required to gain access to the rack mounting bolts, lines and steering coupling.
8.Remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines
9.Place a drain pan under the vehicle and remove the hydraulic power steering pressure hose and power steering return hose from the power steering rack
10.Twist and turn and jiggle it out through one of the wheel well openings
11.Reconnect the Steering Shaft Coupler assembly and bolt the rack back into place
12.Reattach the tie rod ends to the steering knuckles
13.Put the wheels back on and torque the lug nuts to specifications.
14.Remove the return line from the power steering pump and place the end into a bucket.
15.Fill the power steering pump and start the engine until clean fluid comes out of the return hose.
16.Have the front end aligned to reset the toe-in adjustment to specification or the vehicle will handle poorly and wear out the tire quickly.
17.Bleed the trapped air out of the system
(Professional installation is highly recommended)
Rack Re-manufacturing Information
New Oil and Lip Seal
New Oil and Lip Seals installed to ensure quality performance.
New Teflon Rings
New Teflon rings installed on Spoon valves to restore internal sealing of rack and Pinion.
Surfaced to OE Specifications
Racks are finished with proper surface to prevent leaking and to prolong life.
Air Tested to Ensure ReliablePerformance
Hydraulically Tested to Ensure Internal By-Pass for Both High and Low Pressures
RoadSimulated for Proper Functioning
Tie Rod Load Check
Package:
1xPower Steering Rack & Pinion
2x FrontOuter Tie Rod End
(As pictures showed)
- Delivery details
- Payment Method
- Returns details1.We'll ONLYship the item to your Confirmed Address,so please make sure your shipping address is corrector the samebefore you buy item.2.We try our best to ship outthepayment-clearedorders APAP as we promised.
3. Normally, you can expect 2-6business days within US,10-20business days to Canada, up to25business days all around the world.Payment MethodYou can use Paypal or a credit card with VISA or MasterCard logo or apple pay or Googel payReturns PolicyWe stand behind every product weareselling and sold. If you're notsatisfiedwith your purchase,before open the return,please contactwith us at any time.Replacement or refund is up to you.responsePositive response is important to you and me.
If you are satisfied with our service and product, please give us a positive response with 5 star.
If not, please contact us. We will give you a satisfactory answer.
DetailsItems Description:
Type:Power Steering Rack and Pinion&FrontOuter Tie Rod End
Condition: New
Manufacturer Warranty: 1Year
Fitment Type:A new product of good quality that is easy to install and serves as a direct replacement
Interchange Part Number:
15254062, 19133646, 19133648, 19153072, 19153073, 19153074, 19178559, 19207489, 19207491, 22-1036, 22-1145
Note:
1.Orders are usually shipped within 24 hours after your payment(except weekends & official holidays). You can log on to to check your logistics tracking number.
2.Please make sure to provide us with correct, precise and detailed shipping address before purchase, and cannot change it once purchased.
3.Please confirm the product images, title, and part number before Purchase.
Built:
Built to strict quality control standards 100% factory tested.
High Performance:The steering rack solves abnormal noise and oil leakage problems, ensures that the steering wheel rotation angle is proportional to the tire rotation angle, and reduces the steering wheel's control force when turning, which makes driving safer.
2 in 1 Function:Conversion of the steering wheel's rotationalmotion into the linear motion needed for thevehicle's wheels to turn
Reduction of gears, which makes it easierfor the steering wheel to turn the wheels.
Premium Material:With the premium aluminum alloy and steel construction, this steering rack assembly has a great anti-rust and anti-corrosive quality for its long service life.
We put moderate lubricating oil into this assembly so that it can prevent rust and oxidation.
Humanized Design:Ensure a tight seal and smooth steering operation. The hydraulic lines are fully fluid tested at high pressure. And the steel clamps and rubber bellow boots improve steering efficiency.
Attention:
1.Put the wheels in a straight-ahead position
2.Crack loose all the wheel lug nuts
3.Raise and support the vehicle with approved jack stands.
4.Remove both front wheels.
5.Remove the Steering Shaft Coupler Outer Seal and unbolt the upper pinch bolt on the Steering Shaft Coupler assembly
6.Detach the outer tie rod ends
7.Remove any parts required to gain access to the rack mounting bolts, lines and steering coupling.
8.Remove the power steering rack mounting bolts, or crack the power steering high pressure and return lines
9.Place a drain pan under the vehicle and remove the hydraulic power steering pressure hose and power steering return hose from the power steering rack
10.Twist and turn and jiggle it out through one of the wheel well openings
11.Reconnect the Steering Shaft Coupler assembly and bolt the rack back into place
12.Reattach the tie rod ends to the steering knuckles
13.Put the wheels back on and torque the lug nuts to specifications.
14.Remove the return line from the power steering pump and place the end into a bucket.
15.Fill the power steering pump and start the engine until clean fluid comes out of the return hose.
16.Have the front end aligned to reset the toe-in adjustment to specification or the vehicle will handle poorly and wear out the tire quickly.
17.Bleed the trapped air out of the system
(Professional installation is highly recommended)
Rack Re-manufacturing Information
New Oil and Lip Seal
New Oil and Lip Seals installed to ensure quality performance.
New Teflon Rings
New Teflon rings installed on Spoon valves to restore internal sealing of rack and Pinion.
Surfaced to OE Specifications
Racks are finished with proper surface to prevent leaking and to prolong life.
Air Tested to Ensure ReliablePerformance
Hydraulically Tested to Ensure Internal By-Pass for Both High and Low Pressures
RoadSimulated for Proper Functioning
Tie Rod Load Check
Package:
1xPower Steering Rack & Pinion
2x FrontOuter Tie Rod End
(As pictures showed)
- Delivery details
- Payment Method
- Returns details1.We'll ONLYship the item to your Confirmed Address,so please make sure your shipping address is corrector the samebefore you buy item.2.We try our best to ship outthepayment-clearedorders APAP as we promised.
3. Normally, you can expect 2-6business days within US,10-20business days to Canada, up to25business days all around the world.Payment MethodYou can use Paypal or a credit card with VISA or MasterCard logo or apple pay or Googel payReturns PolicyWe stand behind every product weareselling and sold. If you're notsatisfiedwith your purchase,before open the return,please contactwith us at any time.Replacement or refund is up to you.responsePositive response is important to you and me.
If you are satisfied with our service and product, please give us a positive response with 5 star.
If not, please contact us. We will give you a satisfactory answer.
On Jul 30, 2026 at 18:21:38 PDT, seller added the following information:On Aug 6, 2026 at 03:05:08 PDT, seller added the following information:
