When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FilamentFeaturesFilament DiameterTolerancePrinting SpeedPlatform TemperatureNet WeightPLA ClassicHigh Toughness, Good Impact Resistance, Easy to Peel.1.75mm±0.02mm190-210℃: 50-150mm/s
210-230℃: 150-300mm/s
230-260℃: 300-600mm/s50-60℃1.1 KGPLAHigh Compatibility, Environmentally Friendly, Non-toxic and Full 50-100mm/s
210-240℃: 100-200mm/s50-60℃1.1 KGPLA High-SpeedSupport Fast Printing at 600mm/s.1.75mm±0.02mm190-210℃: 50-150mm/s
210-230℃: 150-300mm/s
230-260℃: 300-600mm/s50-60℃1.1 KGPLA RainbowThe colour gradients every 8 metres.1.75mm±0.02mm200-210℃: 50-100mm/s
210-240℃: 100-200mm/s50-60℃1.1 KGPLA Transparent RainbowThe colour gradients every 8 metres. High Precision and Good Light 50-100mm/s
205-220℃: 100-200mm/s50-60℃1.1 KGPLA Marble High-SpeedPrinted parts have marble texture. Low shrinkage, no warping.1.75mm±0.03mm190-210℃: 50-150mm/s
210-230℃: 150-300mm/s
230-260℃: 300-600mm/s50-60℃1.1 KGWoodPLA with 15% wood flour, with Woody Texture and Wood Scent.1.75mm±0.03mm195-205℃: 50-100mm/s
205-215℃: 100-150mm/s
215-260℃: 150-400mm/s50-60℃1.1 KGPLA Carbon FiberContains Fiber Materials with Light Weight and High 50-100mm/s
215-235℃: 100-200mm/s50-60℃1.1 KGPLA Glow in the DarkPLA 50-100mm/s
205-225℃: 100-200mm/s50-60℃1.1 KGPLA TwinklingContains 15% Glitter, with Shiny and Sparkling Texture.1.75mm±0.02mm205-215℃: 50-100mm/s
215-245℃: 100-150mm/s50-60℃1.1 KGPLA MetaHigh Fluidity, Fast Printing at Low 50-100mm/s
195-225℃: 100-200mm/s50-60℃1.1 KGPLA MattePLA with Matte Texture and No Plastic Feel.1.75mm±0.03mm205-215℃: 50-100mm/s
215-245℃: 100-230mm/s50-60℃1.1 KGMatte PLA High-SpeedHigh Toughness, Good Impact Resistance, Easy to Peel.1.75mm±0.02mm190-210℃: 50-150mm/s
210-230℃: 150-300mm/s
230-260℃: 300-600mm/s50-60℃1.1 KGAntiString PLAClean printed works and no 50-100mm/s
215-245℃: 100-230mm/s50-60℃1.1 KGPLA+PLA with High 50-100mm/s
205-220℃: 100-300mm/s50-60℃1.1 KGPLA+2.02-3 Times Higher Impact Strength Than Other PLA+.1.75mm±0.02mm195-205℃: 50-100mm/s
205-220℃: 100-300mm/s50-60℃1.1 KGPLA+ High-SpeedSupport Fast Printing at 600mm/s. Good Fluidity, Fast Printing Without 50-150mm/s
215-230℃: 150-300mm/s
230-260℃: 300-600mm/s50-60℃1.1 KGPLA+2.0 High-SpeedSupport Fast Printing at 600mm/s. Good Fluidity, High 50-150mm/s
215-230℃: 150-300mm/s
230-260℃: 300-600mm/s50-60℃1.1 KGPLA+2.0An Enhanced Version of Regular PLA+.1.75mm±0.02mm195-205℃: 50-100mm/s
205-220℃: 100-300mm/s50-60°C1.1 KGPETGGood Impact Strength and 50-100mm/s
240-260℃: 100-200mm/s60-70℃1.1 KGMatte PETG High-SpeedPETG with Matte Texture and not easy to string.1.75mm±0.02mm205-215℃: 50-100mm/s
240-250℃: 100-300mm/s
260-270℃: 300-600mm/s70-80℃1.1 KGPETG Glow in the DarkContains 10% glow-in-the-dark powder.1.75mm±0.02mm235-245℃: 50-100mm/s
245-250℃: 100-200mm/s70-80℃1.1 KGPETG Carbon FiberContains 10% short fibers. Prints have a matte feel, no 50-150mm/s50-70℃1.1 KGSilk PLA+Smooth Silky Surface and Glossy Bright Color.1.75mm±0.02mm205-215℃: 50-100mm/s
215-235℃: 100-200mm/s50-60℃1.1 KGSilk PLA+ Dual/Tri-ColrPrints have 2/3 colours on different sides. Smooth Silky Surface.1.75mm±0.02mm205-215℃: 50-100mm/s
215-230℃: 100-200mm/s50-60℃1.1 KGABSHigh Impact Resistance, Excellent 50-100mm/s
260-280℃: 100-200mm/s80-100℃1 KGEasy ABSOpen Printing without Enclosure Required, No Warping and No 50-100mm/s
235-255℃: 100-200mm/s60-70℃0.65 KG
1 KGTPU (95A)Good Flexibility with Rubber-like Texture. Shore hardness 95A.1.75mm±0.03mm190-210℃: 50-80mm/s
210-230℃: 80-120mm/s50-60℃0.5 KGTPU SILK (98A)TPU with Silk Texture. Shore hardness 98A.1.75mm±0.03mm210-220℃: 50-100mm/s
220-240℃: 100-200mm/s50-60℃1.1 KGASAUV/Rain/Heat Resistant, Suitalbe for Outdoor Use.1.75mm±0.02mm250-260℃: 50-100mm/s
260-280℃: 100-200mm/s80-100℃1 KGPVBCan be polished by alcohol and isopropyl alcohol.1.75mm±0.03mm200-210℃: 50-100mm/s
210-230℃: 100-200mm/s50-70℃1 KGThe following filaments are 100% neatly wound - PLA / PLA+ / PLA Meta / SILK PLA+ / PETG. (ABS / TPU / PLA Marble / PLA Twinkling is not included.)Tips:
- Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
- Be sure to insert the free end of the filament into the holes to avoid being tangled for next time use.
- If there is no print plan within a few days, retract the filament to protect the printer 3DAleph ObjectsCELCubeProe-NABLELulzbotNew with 99% of FDM 3D PrintersOn Jun 3, 2026 at 20:18:18 PDT, seller added the following information:
