When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BMWOOD MT2 Pen Press Kit For Woodturning Lathes with 2MT Taper.
This simple Pen Press is designed to be used in conjunction with your lathe. There are two nylon pads, the white one has a small dimple in the centre to hold the nib in line. The black pad has a concave dome cut into it to make sure the other end of the pen is also held central and stops it from slipping out.
Both pads come supplied on a 2 morse taper shaft.
To use the pen press. Put the white pad into the headstock taper and the black pad into the tailstock, insert the nib into the white pad and slide the tails stock in until the black pad is pressed against the other end and lock off.
Simply wind the tailstock shaft forward which will press the pen parts together. Once the parts are pressed together unwind the tailstock and remove the pen.
