When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Associated 90046 RC10B7.1 Team KitAssociated 90046 RC10B7.1 Team Kit Team Associated has been at the leading edge of 1:10 scale 2WD off road for over 40 years, starting with the original RC10 and are proud to introduce the RC10B7.1. 40 years has seen a lot of development and changes with each generation being a step forward from the last. The RC10B7.1 boasts the new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed which leads to faster lap times and an overall smoother drive feel. The RC10B7.1 is the recommended starting kit for those who plan to race on carpet, astroturf, and some high-grip sealed clay tracks. This kit comes equipped with anall-new gear differential, front suspension arms with hinge pin brace for improved durability, and an optimized high-grip setup which includes stiffer springs and higher pack shock pistons. As with previous generations, the RC10B7.1 and RC10B7.1D feature fully interchangeable parts between the two kits which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion of any Team Associated race platform. Required to Complete:MotorESCServoTiresWheels Features:Includes 3-Gear Laydown Transmission that maintains original B7 motor position while reducing rotational weight and dragNEW Steering and Caster Block Assembly simplifies assembly and reduces weight without sacrificing tunabilityNEW -2mm Front Ballstud Mount included along with updated Top Plate and Standard Ballstud MountFront Suspension Arms with Hinge Pin Brace for improved durability-2mm Front Shock Tower and \"Gull-Dropper\" Rear Shock Tower and Suspension Arm Plates for lower center of gravityIncludes FT Inverted Rear Shock Standoff Set1-degree Arm Mount \"C\"Includes 78mm Rear Suspension Arms and 69mm CVA BonesIncludes Front and Rear Anti-Roll Bars and hardwareIncludes High-Volume Gear DifferentialLow-Profile RC10B7 Body, 7-inch Rear Wing, and 2.5-inch Front Wing7075-T6 Aluminum Chassis with Optional Weight Plate Pockets (Aluminum plate included with both kits)Shock Tower Covers Front and Rear3.5mm Turnbuckles and Ballcups13mm Big-Bore Shocks Specifications:Power Source: ElectricTerrain: Off-RoadBody Style: BuggyScale Size: 1:1 Associated 90046 RC10B7.1 Team Kit Associated 90046 RC10B7.1 Team Kit
Team Associated has been at the leading edge of 1:10 scale 2WD off road for over 40 years, starting with the original RC10 and are proud to introduce the RC10B7.1. 40 years has seen a lot of development and changes with each generation being a step forward from the last. The RC10B7.1 boasts the new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed which leads to faster lap times and an overall smoother drive feel.
The RC10B7.1 is the recommended starting kit for those who plan to race on carpet, astroturf, and some high-grip sealed clay tracks. This kit comes equipped with an
all-new gear differential, front suspension arms with hinge pin brace for improved durability, and an optimized high-grip setup which includes stiffer springs and higher pack shock pistons. As with previous generations, the RC10B7.1 and RC10B7.1D feature fully interchangeable parts between the two kits which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion of any Team Associated race platform.
Required to 3-Gear Laydown Transmission that maintains original B7 motor position while reducing rotational weight and drag
NEW Steering and Caster Block Assembly simplifies assembly and reduces weight without sacrificing tunability
NEW -2mm Front Ballstud Mount included along with updated Top Plate and Standard Ballstud Mount
Front Suspension Arms with Hinge Pin Brace for improved durability
-2mm Front Shock Tower and \"Gull-Dropper\" Rear Shock Tower and Suspension Arm Plates for lower center of gravity
Includes FT Inverted Rear Shock Standoff Set
1-degree Arm Mount \"C\"
Includes 78mm Rear Suspension Arms and 69mm CVA Bones
Includes Front and Rear Anti-Roll Bars and hardware
Includes High-Volume Gear Differential
Low-Profile RC10B7 Body, 7-inch Rear Wing, and 2.5-inch Front Wing
7075-T6 Aluminum Chassis with Optional Weight Plate Pockets (Aluminum plate included with both kits)
Shock Tower Covers Front and Rear
3.5mm Turnbuckles and Ballcups
13mm Big-Bore Shocks
Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:1
× × × × ×
Buy now and save! Shipping info
Click the Shipping & Payments tab above the listing description for more info
Click the Shipping & Payments tab above the listing description for more info!
PAYMENT
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
Thank you for shopping with us on !
Additional Information
No additional information at this time
Ask seller a question
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© My Store
Shipping & Payments
Click the Shipping & Payments tab above the listing description for more info
Payment
Accepted Payment Methods
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Seller will pay for return shipping.
integration by
