Aaiwa Fits 2003-2005 Dodge Ram 2500 3500 Front or Rear Bumper w/D-Ring and Light For Sale

• Toyota Bumper
• Ford Bumper
• Dodge Ram Bumper
• Jeep Wrangler JK JL JT Bumper
• GMC Sierra Bumper
• Grand Cherokee WJ & XJ Bumper
• Land Rover Bumper
• Chevrolet Bumper
• Nissan Bumper

Manufacturer Direct Sell| Awesome customer\'s service GUARANTEED | Free shipping

• [Compatibility]: Fit For 2003-2004-2005 Dodge Ram 2500/3500
  [Heavy Duty Construction]: The bumper body is made of heavy-duty, high-strength 5/32-inch steel, and the winch plate and mounting brackets are made of 2/12-inch steel. The front bumper weighs approximately 118.1 lbs and the rear bumper weighs approximately 83.7 lbs, both packages are shipped separately
  [Practical Design]: The front and rear bumpers are each equipped with two high-strength D-ring shackles and two 4.75T D-rings. The Front bumper is equipped with a built-in winch plate ,that can withstand a winch up to 12,000 pounds
  [Comprehensive Protection]: The front bumper is a three-piece structure, and the rear bumper is a one-piece structure that perfectly fits the body lines.Rugged off-road styling enhances the vehicle\'s overall aesthetic, giving it a tough and aggressive look
  Super Bright Built-in LED Lights: Designed for the Ram 2500 3500 , the front bumper comes with 5x aluminum LED lights and the rear bumper is fitted with 4x aluminum LED lights. They improve visibility and driving safety on dark roads at night, while giving your truck a stylish and striking look.
  [Durable Coating]: Textured black powder coating and internal premium electronic coating process for long-lasting durability and corrosion resistance
  [Easy to Install]: No cutting, drilling or modification required. Replace your original stock bumper with a factory mounting point direct bolt-on upgrade. Comes with mounting hardware kit and installation instructions
  A 22.5mm sensor installation hole is reserved, but it is not compatible with the original vehicle sensor and requires the purchase of an additional 22.5mm compatible sensor for installation

Only Front Bumper:

• 1x Front Bumper
• 1x 120W LED Light Bar
• 2x 42W Square LED Lights
• 2x 24W Amber Strip LED Lights
• 2x 4.75-T D-Rings
• 1x Wiring Harneess(5 led)
  
• 2x Washers
• A set of screws
• Installation instructions

Only Rear Bumper:

• 1x Rear Bumper
• 2x 24w Square LED Spotlights
• 2x 18w LED lights
• 2x 4.75 ton D-ring and shackles
• Installation Manual

Front + Rear Bumper:

• 1x Front Bumper
• 1x Rear Bumper
• 1x 120W LED Light Bar
• 2x 42W Square LED Lights
• 2x 24W Amber Strip LED Lights
• 2x 24W Square LED Lights
• 2x 18W Strip LED Lights
• 4x 4.75-T D-Rings
• 2x Washers
• 1x Wiring Harneess(5 led)
  
• A set of screws
• Installation Manual

• Shipping Policy
• Payment Method
• Returns Policy

• Toyota Bumper
• Ford Bumper
• Dodge Ram Bumper
• Jeep Wrangler JK JL JT Bumper
• GMC Sierra Bumper
• Grand Cherokee WJ & XJ Bumper
• Land Rover Bumper
• Chevrolet Bumper
• Nissan Bumper

Manufacturer Direct Sell| Awesome customer\'s service GUARANTEED | Free shipping

• [Compatibility]: Fit For 2003-2004-2005 Dodge Ram 2500/3500
  [Heavy Duty Construction]: The bumper body is made of heavy-duty, high-strength 5/32-inch steel, and the winch plate and mounting brackets are made of 2/12-inch steel. The front bumper weighs approximately 118.1 lbs and the rear bumper weighs approximately 83.7 lbs, both packages are shipped separately
  [Practical Design]: The front and rear bumpers are each equipped with two high-strength D-ring shackles and two 4.75T D-rings. The Front bumper is equipped with a built-in winch plate ,that can withstand a winch up to 12,000 pounds
  [Comprehensive Protection]: The front bumper is a three-piece structure, and the rear bumper is a one-piece structure that perfectly fits the body lines.Rugged off-road styling enhances the vehicle\'s overall aesthetic, giving it a tough and aggressive look
  Super Bright Built-in LED Lights: Designed for the Ram 2500 3500 , the front bumper comes with 5x aluminum LED lights and the rear bumper is fitted with 4x aluminum LED lights. They improve visibility and driving safety on dark roads at night, while giving your truck a stylish and striking look.
  [Durable Coating]: Textured black powder coating and internal premium electronic coating process for long-lasting durability and corrosion resistance
  [Easy to Install]: No cutting, drilling or modification required. Replace your original stock bumper with a factory mounting point direct bolt-on upgrade. Comes with mounting hardware kit and installation instructions
  A 22.5mm sensor installation hole is reserved, but it is not compatible with the original vehicle sensor and requires the purchase of an additional 22.5mm compatible sensor for installation

Only Front Bumper:

• 1x Front Bumper
• 1x 120W LED Light Bar
• 2x 42W Square LED Lights
• 2x 24W Amber Strip LED Lights
• 2x 4.75-T D-Rings
• 1x Wiring Harneess(5 led)
  
• 2x Washers
• A set of screws
• Installation instructions

Only Rear Bumper:

• 1x Rear Bumper
• 2x 24w Square LED Spotlights
• 2x 18w LED lights
• 2x 4.75 ton D-ring and shackles
• Installation Manual

Front + Rear Bumper:

• 1x Front Bumper
• 1x Rear Bumper
• 1x 120W LED Light Bar
• 2x 42W Square LED Lights
• 2x 24W Amber Strip LED Lights
• 2x 24W Square LED Lights
• 2x 18W Strip LED Lights
• 4x 4.75-T D-Rings
• 2x Washers
• 1x Wiring Harneess(5 led)
  
• A set of screws
• Installation Manual

• Returns Policy
• Contact Us
• Shipping Policy
• Payment Method

1. We will provide 1-3 years warranty. If you are not satisfied with the product, you can return it for exchange or refund within 60 days after delivery.
2. Regarding the return, the products in the store are provided with a 60-day free return service. Please contact us on before returning, so that we can provide shipping labels. Please ensure that the goods are in good condition before returning, and the returned goods must be returned in the original packaging.
3. If you receive the wrong or damaged product, please don\'t open the return or case immediately. You can send photos of the wrong or damaged products and contact us first, and we will reply you within 12 hours and provide you with a satisfactory solution.

1. We operate the store on the principle of \"quality first, reputation first, customer first, honesty first\". If you have any questions, please contact us first to solve them.
2. Our shop specializes in producing and selling Car front and rear bumpers, LED headlights, LED Whip lights, working lights and LED light Bar
3. Due to the time difference, we may not be able to reply to your message in time. On weekdays, we will reply you within 12 hours to solve your problem，Weekend is 48 hours。 please don\'t worry, all letters will be answered on working days. Our customer support time: (GMT+8) 9:00-18:00 Monday to Friday.

1. Orders are usually shipped within 24 hours. On weekends or public holidays, orders will be dispatched within 48–72 hours.
2. The standard estimated delivery time is 3–8 business days.
3. Most of our packages are shipped via USPS or FedEx.
4. Delivery service is not available on weekends, public holidays, or outside business hours.
5. If you have any questions or concerns about delivery, please contact us via message. We will do our best to ensure your satisfaction.
6. For order cancellation or address changes, please contact us within 12 hours after placing your order. Upon receiving your message, we will reply and confirm your Information.

1. We accept PayPal, Google Pay, VISA, Master Card and Amex. Credit card payment can also be made through PayPal.
2. All goods will be sent to your address. Please confirm that your Yi Bei address is correct before payment.

On Sep 20, 2026 at 20:40:31 PDT, seller added the following information: