When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TSA® AP-00083 ADAPTER PLATE — GLOCK® MOS TO RMR FOOTPRINT — FITS RMR®, SRO®, HOLOSUN® 407C / 507C / 508T & MORE — 7075-T6 ALUMINUM🔥 PRODUCT DESCRIPTION
The TSA® AP-00083 Adapter Plate is a precision-engineered mounting solution designed to install compatible RMR-footprint red dot optics onto full-width GLOCK® MOS pistols.
Machined from high-strength 7075-T6 aircraft-grade aluminum, the AP-00083 provides a durable and reliable mounting interface while maintaining a lightweight, low-profile configuration.
At approximately 2 mm thick, the plate minimizes unnecessary optic height and helps maintain a clean, streamlined firearm setup. Depending on the firearm, optic, and iron-sight heights, the low-profile design may also improve the visibility of compatible backup iron sights.
The AP-00083 connects the factory full-width GLOCK® MOS mounting interface with popular optics using the Trijicon® RMR mounting footprint, including compatible Trijicon®, Holosun®, Swampfox®, ADE®, AmeriGlo®, Riton®, SIG SAUER®, Primary Arms®, and Vector Optics® models.
Its matte-black hard-anodized finish provides corrosion resistance, surface durability, and a professional factory-style appearance.
Each adapter plate includes a hex key and five sets of mounting screws with pre-applied removable threadlocker, providing multiple hardware options for compatible optic installations.
The AP-00083 provides a durable aftermarket alternative to the factory GLOCK® MOS Adapter Plate No. 2.
✨ HIGHLIGHTS
- GLOCK® MOS to RMR Conversion: Allows compatible RMR-footprint optics to be installed on full-width GLOCK® MOS slides
- 7075-T6 Aluminum: Precision-machined aircraft-grade aluminum provides excellent strength with minimal weight
- Ultra-Low Profile: Approximately 2 mm plate thickness helps minimize overall optic height
- Precision CNC Machined: Manufactured for consistent alignment and secure optic mounting
- Hard-Anodized Finish: Matte-black corrosion-resistant coating provides increased surface durability
- Broad Optic Compatibility: Supports many popular optics using the Trijicon® RMR mounting footprint
- Full-Width GLOCK® MOS Compatibility: Designed for compatible GLOCK® MOS pistols with approximately 1-inch-wide slides
- Not for Slimline Models: Not designed for GLOCK® 43X MOS or GLOCK® 48 MOS pistols
- Five Screw Sets Included: Multiple screw options are included for compatible optic configurations
- Pre-Applied Threadlocker: Included mounting screws arrive with removable threadlocker already applied
- Installation Tool Included: Hex key included for convenient installation
- Factory Plate Alternative: Designed as an aftermarket alternative to the GLOCK® MOS Adapter Plate No. 2
- Lightweight Design: Adds minimal bulk to concealed-carry, competition, duty, and recreational setups
- Factory-Style Appearance: Low-profile matte-black design blends cleanly with compatible slides and optics
📦 WHAT\'S INCLUDED✔️ TSA® AP-00083 Adapter Plate
✔️ Four Sets of Mounting Screws
✔️ Pre-Applied Removable Threadlocker
✔️ Hex Installation Key
✔️ Protective Retail Packaging📊 SPECIFICATIONS
- Brand: TSA® Product Line
- Model: AP-00083
- Product Type: Red Dot Optic Adapter Plate
- Optic Interface: Trijicon® RMR Footprint
- Material: 7075-T6 Aircraft-Grade Aluminum
- Manufacturing: Precision CNC Machined
- Finish: Matte Black Hard Anodized
- Plate Thickness: Approximately 2 mm
- Slide Width Compatibility: Compatible Full-Width GLOCK® MOS Slides Approximately 1 Inch Wide
- Compatible Generations: Compatible Gen 4 and Gen 5 MOS Models
- Included Hardware: Four Sets of Mounting Screws
- Threadlocker: Pre-Applied to Included Screws
- Included Tool: Hex Key
- Color: Black
- Application: Concealed Carry, Duty, Competition, Range, and Recreational Use
🔧 FITMENT & COMPATIBILITYCompatible Full-Width GLOCK® MOS GEN4 & GEN5 Pistols Include: ✔️ GLOCK® 17 MOS
✔️ GLOCK® 19 MOS
✔️ GLOCK® 19X MOS
✔️ GLOCK® 22 MOS
✔️ GLOCK® 23 MOS
✔️ GLOCK® 34 MOS
✔️ GLOCK® 35 MOS
✔️ GLOCK® 40 MOS
✔️ GLOCK® 41 MOS
✔️ GLOCK® 45 MOS
✔️ GLOCK® 47 MOS
✔️ GLOCK® 49 MOS Compatible Optics Include: ✔️ Trijicon® RMR®
✔️ Trijicon® SRO®
✔️ Holosun® 407C
✔️ Holosun® 507C
✔️ Holosun® 508T
✔️ Holosun® 507 Competition
✔️ ADE® RD3-019
✔️ ADE® RD3-020
✔️ ADE® RD3-023
✔️ Swampfox® Kingslayer
✔️ Swampfox® Liberty
✔️ Swampfox® Justice
✔️ AmeriGlo® Haven
✔️ Riton® Optics X3 Tactix PRD
✔️ SIG SAUER® ROMEOZero-R
✔️ Primary Arms® Classic Series Mini Reflex Sight using the RMR footprint
✔️ Vector Optics® Frenzy-X models using the RMR footprint
✔️ Other compatible RMR-footprint optics where mounting dimensions and screw requirements match NOT DESIGNED FOR: ✖️ GLOCK® 43X MOS
✖️ GLOCK® 48 MOS
✖️ Slimline GLOCK® slides
✖️ Standard non-MOS slides
✖️ RMSc or Holosun K-footprint optics such as the Holosun® 407K, 507K, EPS Carry, or Shield® RMSc
✖️ DeltaPoint Pro-footprint optics
✖️ ACRO-footprint optics IMPORTANT COMPATIBILITY NOTICE: This adapter plate is designed for compatible full-width GLOCK® MOS pistols. It is not intended for GLOCK® Slimline MOS models such as the G43X MOS or G48 MOS. Some optic families contain models with different mounting footprints. Verify the exact optic model rather than relying only on the manufacturer or product-family name. Verify the firearm model, optic footprint, mounting-hole spacing, recoil-lug arrangement, screw thread, screw length, and internal clearance before installation.🛠️ INSTALLATION INFORMATION✔️ Confirm the firearm is completely unloaded before beginning installation
✔️ Remove the factory MOS cover plate and retain the original hardware
✔️ Clean the slide, adapter plate, optic base, and screw threads before assembly
✔️ Position the AP-00083 securely within the factory MOS mounting interface
✔️ Select the correct included screw set for the specific optic
✔️ Verify screw thread, screw length, and internal clearance before tightening
✔️ Follow the firearm and optic manufacturers\' recommended torque specifications
✔️ Do not over-tighten mounting screws
✔️ Allow pre-applied threadlocker to cure according to appropriate installation procedures
✔️ Confirm optic operation and establish zero after installation
✔️ Recheck mounting-screw tightness after the first range session
✔️ Professional gunsmith installation is recommended if proper fitment is uncertain⚠️ IMPORTANT SCREW NOTICEMultiple screw sets are included because optic manufacturers may use different screw lengths, head dimensions, threads, and mounting requirements. The buyer or installer must identify and use the correct screw set for the specific optic and firearm combination. Before operating the firearm, verify that the screws securely engage the mounting interface without bottoming out, protruding excessively, interfering with internal components, or preventing the optic from seating flat against the plate. Never force an incorrect screw into the optic, plate, or slide.🛡️ TERMS & CONDITIONS✔️ 30-Day Free Returns — Pre-Paid Label Provided
✔️ Item must be unused and returned in original condition
✔️ Refunds are issued after the returned item is received and inspected
✔️ Buyer is responsible for verifying firearm and optic compatibility
✔️ Buyer is responsible for selecting the correct mounting screws
✔️ Buyer is responsible for proper installation and torque
✔️ Buyer is responsible for compliance with all applicable local, state, and federal laws
✔️ Professional installation is recommended
✔️ No sales where prohibited⚠️ CALIFORNIA NOTICE: Buyer is responsible for ensuring compliance with all applicable local, state, and federal laws. This product is an optic mounting accessory and is not a firearm. Orders may be canceled if applicable age, identity, delivery, or legal-compliance requirements cannot be completed or verified.🚚 SHIPPING DETAILS✔️ FAST & FREE SHIPPING from USA
✔️ Ships next business day
✔️ Ships from U.S. inventory
✔️ Tracking information provided
✔️ Secure professional packaging
✔️ No international orders
✔️ No freight forwarders or export-reshipping addresses™️ TRADEMARK DISCLAIMERTSA® and The Southern Armorer® are trademarks of The Southern Armorer LLC. GLOCK®, MOS, Trijicon®, RMR®, SRO®, Holosun®, 407C®, 507C®, 508T®, ADE®, Swampfox®, Kingslayer®, Liberty®, Justice®, AmeriGlo®, Haven®, Riton®, SIG SAUER®, ROMEOZero®, Primary Arms®, Vector Optics®, Frenzy-X®, and all related product names are registered trademarks or trademarks of their respective owners. Trademark names are referenced strictly to describe compatibility, footprint, fitment, and intended application. No affiliation, sponsorship, or endorsement is implied unless expressly stated.🔥 OFFICIAL TSA® PRODUCT LINE 🔥The Southern Armorer LLC develops optics mounting solutions, adapter plates, glow sights, and installation hardware designed for modern firearm platforms. We speak optics. We know footprints. We understand adapter plates.
Get the right fit — the first time. 🛒 EXPLORE MORE IN OUR STORE!Looking for more optics, adapter plates, glow sights, and mounting hardware? 👉 VISIT OUR store — THE SOUTHERN ARMORER 🔥
