When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Fan:Maximum Fan CFM: 1730 cfmFan Diameter (in): 14.050”Thickness (in): 2.500”Number of Blades: 8 S-Type bladesMaximum Fan RPM: 2,250 rpmBlade Material: PlasticAmp Draw: 12.70 ampsPackage includes:1 X 3-Row Aluminum Radiator1 XAA5052Aluminum Shroud1 X 14" Fans (Includes mounting kits)Just as pictures Ford Mustang V81968-1969 Ford Torino V81967-1968 Ford LTD V81964-1968 Ford Country Squire L6/ V81964-1968 Ford Country Sedan L6/ V81964-1968 Ford Ford Galaxie (261) L6/ V81963-1969 Ford Fairlane L6/ V8 3 Row Aluminum Radiator Shroud fan For Ford Maverick 1963-77 Pinto Mercury Comet
Fan:
Maximum Fan CFM: 1730 cfm
Fan Diameter (in): 14.050”
Thickness (in): 2.500”
Number of Blades: 8 S-Type blades
Maximum Fan RPM: 2,250 rpm
Blade Material: Plastic
Amp Draw: 12.70 amps
Package includes:
1 X 3-Row Aluminum Radiator
1 XAA5052Aluminum Shroud
1 X 14" Fans (Includes mounting kits)
Just as pictures Ford Mustang V8
1968-1969 Ford Torino V8
1967-1968 Ford LTD V8
1964-1968 Ford Country Squire L6/ V8
1964-1968 Ford Country Sedan L6/ V8
1964-1968 Ford Ford Galaxie (261) L6/ V8
1963-1969 Ford Fairlane L6/ V8
1966-1970 Ford Falcon V8
1967-1968 Mercury Cougar/ XR7 V8
How to clean radiator:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
How to replace the radiator:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)
Note:
1. Project operation, the vehicle normal temperature 60 to 80 degrees.
2. Add detergent if the tank is too full can take some antifreeze.
Item SpecificsBrand AutoPart361Type Aluminum RadiatorPlacement on Vehicle Engine CompartmentManufacturer Warranty 3 YearsOE/OEM Part Number CC339 CU339 AE339 DPI339 DHR339Interchange Part Number CC339 CU339 AE339 DPI339 DHR339Rows 3 RowsFeatures Downflow RadiatorMaterial AluminumColor SilverFitment Type Direct ReplacementMounting Style Bolt-OnItem Length 20-1/4 inchesOverall Width 21" Height x 22 1/4" Width(Tank Size)Fitment 1 For Ford Mustang 1967-70/Ford Falcon L6 V8 Engines 1966-70Fitment 2 For Ford Fairlane 1963-69/Ford Torino L6 V8 Engines 1968-69Fitment 3 For Ford Mercury Cougar L6 V8 Engines 1967-1968Fitment 4 For Ford LTD 1967-1968 / Ford Galaxie L6 V8 Engines 1964-1967
Payment
We only acceptPaypal, GooglePay, VISA, MasterCard, AmericanExpress, Discover, Mastercard etc.
Shipping
We process and dispatch your purchase within 1 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
Returns
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative response, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
Please don't open any return request before contact us.
About Us
We strive for our customer satisfaction at best possible.
If you have any questions, please feel free to email our service specialists.
We greatly appreciate your POSITIVE response. Please do NOT leave negative response without asking for help. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US 3 Row Aluminum Radiator Shroud fan For Ford Maverick 1963-77 Pinto Mercury Comet
Fan:
Maximum Fan CFM: 1730 cfm
Fan Diameter (in): 14.050”
Thickness (in): 2.500”
Number of Blades: 8 S-Type blades
Maximum Fan RPM: 2,250 rpm
Blade Material: Plastic
Amp Draw: 12.70 amps
Package includes:
1 X 3-Row Aluminum Radiator
1 XAA5052Aluminum Shroud
1 X 14" Fans (Includes mounting kits)
Just as pictures Ford Mustang V8
1968-1969 Ford Torino V8
1967-1968 Ford LTD V8
1964-1968 Ford Country Squire L6/ V8
1964-1968 Ford Country Sedan L6/ V8
1964-1968 Ford Ford Galaxie (261) L6/ V8
1963-1969 Ford Fairlane L6/ V8
1966-1970 Ford Falcon V8
1967-1968 Mercury Cougar/ XR7 V8
How to clean radiator:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.
How to replace the radiator:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)
Note:
1. Project operation, the vehicle normal temperature 60 to 80 degrees.
2. Add detergent if the tank is too full can take some antifreeze.
Payment
We only acceptPaypal, GooglePay, VISA, MasterCard, AmericanExpress, Discover, Mastercard etc.
Shipping
We process and dispatch your purchase within 1 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
Returns
Please contact us first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative response, please contact us first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
Please don't open any return request before contact us.
About Us
We strive for our customer satisfaction at best possible.
If you have any questions, please feel free to email our service specialists.
We greatly appreciate your POSITIVE response. Please do NOT leave negative response without asking for help. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have.
Hot Item USA Front Bumper Fog Light Trim Bezel Cover Base Cap for Toyota Camry 2007-2009 USD 8.69 4PCS Ignition Coil Female Connector Plug Harness For 2002-2010 Toyota Camry 2.4L USD 8.39 Rubber Hood Seal Gasket/Replacement 74146-TBA-A01 For Honda Civic 2016-2019 USD 14.83 LH&RH Rear Bumper Marker Reflector For BMW 3-Series F30 F31 M Sport 328i 335i USD 14.83 Fit For 2022-2023 Honda Civic Grille Spacer Left+Right Side Front Plastic USD 8.25 New List Item
