When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Application:Mainly used for motor electric heating , bottles, cabinet, coffee shell, electric iron, dryer, air conditioning, heater, electronic cooker, heater, and motor cleaner etc.Normally Closed (NC):When the temperature control switch is in the operating state (circuit connected), it will trip (circuit disconnected) and stop working once the temperature exceeds the set threshold, e.g., electric kettles.Specification:Name : Temperature Control SwitchAction Temperature: 40°CAction Type: NC ( Normally Closed )Rated Voltage/Current : 250V/10APin Type : Bent-PinPin Width : 6.3mm/0.25inchContact Life: More than 50,000 times (action times)Electrical Strength: AC50Hz, 2000V/min no breakdown and arc phenomenonQty:2PcsPackage Content:2Pcs 10A 40°C Bent-Pin Retaining Ring (Normally Closed) Temperature Control Switch
Other accessories are not includedNote:
Please allow 0.5-1cm differences due to manual measurement.
Due to the light and screen difference, the item\'s color may be slightly different from the pictures.Notice:1.Do not deform or crush the shell during installation.2.This product is not suitable for air temperature sensing, only for contact temperature sensing!It can be fixed with cable ties, copper wires, iron wires, mounting brackets, thermal conductive silicone, or 704 silicone rubber.3.When installing the product, the temperature control switch should be closely attached to the mounting surface of the controlled equipment to avoid inaccurate temperature sensing.
On Jan 18, 2026 at 20:13:18 PST, seller added the following information:
