When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[ BE AWARE ] These are OEM length lug bolts and are NOT to be used with wheel spacers.
[ NOTE ] Double check the Thread Size, Shank Length, and Seat you need before purchasing. Installing incompatible hardware can cause damage to vehicle components and may cause lug bolts to loosen while driving.
[ SPECIFICATIONS ]
Thread Size: 14x1.5
Color: Silver
Seat Type: Cone Seat (60 Degree Taper)
Shank Length: 28mm
[ FITMENT ]
Compatible with AUDI 1999+ TT, 1998+ A3, 2000+ S3, 1996+ A4, 1992+ S4, 2008+ A5 / S5, 1995+ A6 / S6.
Compatible with AUDI 1997+ A8, 2001+ S8, 2016+ A7, 2013+ S7, 2009+ Q5, 2007+ Q7, 2012+ SQ5.
Compatible with VOLKSWAGEN 1985+ Beetle, 2007-2016 EOS, 1999+ Golf, 2006+ GTI, 2000+ Jetta, 1998+ Passat, 2009+ Tiguan.Powered by Frooition
-
IMPORTANT: MEASURE YOUR OEM BOLT SHANK LENGTH prior to purchasing. Vehicles come with a variety of bolt lengths. This 28mm Shank Length bolt will NOT FIT if it is not the same size as your OEM lug bolt. See Diagram for Measuring Help. Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.
-
WARNING: VERIFY VEHICLE LUG BOLT SIZE, SEAT AND THREADS. Check your vehicle\'s bolt thread size, as various years/models come with different size bolts. These are Cone Seat (60 Degree Taper) shaped bolts. Make sure your wheels bolt seat have this seat type. See Diagram for Help. During Installation, ensure that your bolts get 5-8 full turns before tightening.
-
[SPECIFICATIONS] Pack of 20 - Silver Bolts | Thread Size: 14x1.5 | Seat Type: Cone Seat (60 Degree Taper) | Shank Length: 28mm (ie thread length).
-
MANUFACTURING: Made with cold forged steel. Machine precision threads ensure the best fit on your vehicle\'s hub. Zinc coating provides exceptional corrosion/rust resistance and appearance. Additional Heat Treating Process ensures dependable strength, durability, and performance.
-
FITMENT: Compatible with Audi A3, S3, A4, S4, A5, S5, A6, S6, Including FWD RWD Quattro. Compatible with Audi A7, S7, A8, S8, TT, Q5, Q7, Including FWD RWD Quattro. Also compatible with Volkswagen 1985+ Beetle, 2007-2016 EOS, 1993-1998 Golf V6, 1999+ Golf. Compatible with Volkswagen 2006+ GTI, 2000+ Jetta, 1998+ Passat, 2009+ Tiguan.
Quantity Set of Twenty (20) Lug Bolts Thread Size 14x1.5 Seat Type Cone Seat (60 Degree Taper) Shank Length 28mm Grade 10.9 Grade (Factory OEM) Hex Size 17mm Material Steel (Heat Treated) Finish Silver zinc plated (Prevents Rust & Corrosion)
FITMENT INFORMATION
How do I determine what Shank Length I need?
1) Measure shank length of OEM bolt (Threaded portion, starting at end of the seat to the end of the bolt)
2) Measure the thickness of the spacer you will be using (if not using a spacer, then this measurement is zero)
3) Add measurements from step 1 and step 2. And that is the shank length you need
What is the difference between Cone and Ball seat?
This is determined by your wheel\'s lug seat. The seat of the bolt refers to the part of the bolt that makes contact with the wheel\'s lug seat. The most common seats are Cone (conical / tapered) and Ball (radius / rounded). Cone type features a straight taper seat, whereas Ball type features a curved seat.
\'s Compatibility Table above should only be used as a guide. The buyer is ultimately responsible for taking proper measurements and ensuring they are choosing the correct length bolt for their application
Before purchasing, check the Thread Size, Seat Type, and Shank Length to ensure it matches your vehicle\'s specs. View Diagram above. And see the Important Notes tab below for more details.
Important NotesImportant NotesLegal DisclaimerImportant Notes Before Purchasing
Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer\'s responsibility to ensure they are purchasing the correct thread size.
Verify Shank Length - It is crucial for buyers to measure their OEM lug bolt shank length. It is not possible for us to guarantee fitment of this for your vehicle since we do not know if you are using a wheel spacer, and what size that spacer is.
Verify Seat Type - Wheel Lug Holes have either cone seat or ball seat. It\'s impossible for us to know what you have. Therefore, it is the buyer\'s responsibility to verify the seat of this bolt matches their wheels.
Questions? Need Help? We are here to answer your questions. Message us if you are not 100% sure about fitment, shank length, or seat type.
Installation
Professional Installation Recommended
Be sure to torque the lug bolts to the vehicle manufacturer specifications
Avoid using an impact wrench; improper usage may cause damage to components
Check and re-torque after 25-50 miles of driving
Legal InformationLegal InformationNOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.More Items!View more great items10pc Extended 14x1.25 Black Lug Bolts | 40mm Shank, Cone Seat | for F10 F30 BMWs$33.4910pc Extended 12x1.5 Black Lug Bolts for BMW 30mm Shank Conical Cone Taper Seat$20.4910pc BMW 12x1.5 Thread Pitch Lug Bolts - Silver Conical Cone - OEM Length 26mm$18.1910pc Extended 14x1.25 Black Lug Bolts | 48mm Shank, Cone Seat | for F10 F30 BMWs$34.19 Powered by FrooitionFrooition | No-js Template | design, store design, shop design, template design, listing design (ver:froo_no_js)This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
