1911 Mech-Tech barrel conversion CCU for 1911 models .45 cal 16\" barrel For Sale

1911 Mech-Tech barrel conversion CCU for 1911s. .45cal Stainless 16\" barrel.Frame Size Compatibility–Measuring from the center of the slide lock pin, the dust cover must be from 1 5/8” to 3 ½” to work with the CCU. Most 1911 pistols, built to original 1911 specs will work whether they have 5\" , 4\" (Officer model) and many 3\" (like the Kimber Ultra) barrels (see the picture at the top of this page for dust cover length requirements). ‘Minis’ or ‘Micro’ 1911 style pistols won’t work with the CCU. Double stack magazine models work fine so long as the rails/trigger/hammer are all standard 1911 spec. Double Action “1911s” do NOT work with the CCU.Grip Safety– this still works when the CCU is used. NOTE:Factory Loaded Ammunition Only.Mech Tech recommends only using good quality factory loaded ammunition in the CCU. The CCU is a blowback operated action and is capable of safely firing ammunition up to +P. DO NOT USE +P+ or ‘hotter’ loads.