When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CT Sounds is offering a limited quantity of our popular MESO-6-5-D2 for sale on . This item shows signs of installation/cosmetic wear (scratches, scuff marks on basket, etc.) and was tested and certified by our in-house technicians as fully operational and functions as intended. The original packaging may be damaged and missing protective wrapping, product manuals, and decal stickers. All used subwoofers purchased directly from our store come with a 1-year manufacturer warranty.
General Specifications: Condition:UsedProduct Type:Car SubwooferSubwoofer Size:6.5"Voice Coil Configuration:Dual 2 OhmRMS Power:400 WattsMAX Power:800 WattsVoice Coil Type:2 Inch - 4 Layer High-Temperature CCAW Voice CoilMagnet Type:Double Stacked Y35 Ferrite MagnetBottom Plate Type:Signature Chrome Low Carbon Iron Bottom PlateSurround Type:Dual White Stitched Competition Mega Foam SurroundCone Type:Composite Paper with 5% Carbon Fiber ReinforcementTinsel Lead Type:Dual Round Weaved Copper Tinsel LeadsTerminal Type:8 Gauge Push TerminalsBasket Type:Cast AluminumSpider Material:Poly-Cotton + Nomex BlendT/S HzVas:1.41 LMms:75.6 gCms:0.057 m/NRe:1.02 ΩBl:6.92 TmLe:0.417 mHSd:132.73 cm²Xmax - Single Way (mm):8 mmXmax - Single Way (cm):0.8 cmVd (Sd*Xmax):106.184 cm³SPL:83.2 dBSubwoofer Measurements: Cutout diameter 5.91" Overall diameter 7.20" Mounting depth 5.08" Box Specifications: Port Area 12 in 2 Displacement 0.05 ft 3 Flat Response Curve (SQ): Sealed 0.2 ft 3 Ported 0.13 ft 3 Tuning Frequency 50 Hz Boomer Response Curve (SQ): Sealed - Ported 0.25 ft 3 Tuning Frequency 42 Hz
*Flat response curve (SQ) is geared towards people looking for responsiveness. This style box is loud on all frequencies, generates little impedance loss, and can utilize an amplifier rated at the same RMS as the subwoofer.
*Boomer response curve (SPL) is geared towards people looking for maximum loudness. This style box will be louder than the flat response curve at some frequencies, has a high impedance rise, and can utilize an amplifier rated at a slightly higher RMS than the subwoofer.
*Enclosure recommendations do not account for subwoofer, bracing, and port displacement.
