When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Warm Tips:
If you are not sure about the bulb size, please send us your vehicles' make/model/year via message to confirm with us before purchasing.Features:
-H13 (High/Low Beam)+ 9145/H10/9140 (fog light) replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-Especially designed for upgrading the Headlight,Fog light,Daytime Running Light
-50W Per Bulb, Low Power Consumption
-No delay to light up, Faster on/off response time
-Lifespan: 50,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the carSpecifications:
-Bulb Size: H13 (High/Low Beam)+ 9145/H10/9140 (fog light)
-100% Brand New and High quality.
-Use CSP technoloty, amazing super bright lighting
-Chips Type: CSP chip high power
-Application: Headlight / Fog Driving Light
-Beam Type: High Beam / Low Beam / 360°Beam Angle
-Color Temperature: 6000K White
-Lumens: 6000 Lumens Per Bulb
-50W Per Bulb
-Working Voltage: DC 9V to 32V
Packing Including:
2x H13/9008 Headlights(High Low Beam)
2x 9145/H10/9140 Fog Light Bulbs
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the en of the bulb does not come in contact with the interior