When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wireless Hydraulic Control System
Wireless Remote Control System for 12V DC Hydraulic Applications
Part Number: RCS08
Control one 12-volt DC hydraulic application from 50 to 100 feet away, including from inside your truck, while keeping your original tethered remote available for use.
Part Number: RCS08
Alt Part Number: G3-H01
12V DC Application
Top Buyer Decision Panel
Specifications
Specification
Detail
Part Number / SKU
RCS08
Alt Part Number
G3-H01
Brand
Not specified in the provided information
Product Type
Wireless remote control system
Operating Range
50 to 100 feet
Voltage / System
One 12-volt DC application
Application Type
Single or dual valve application
Installation Terminals
5 terminals
Estimated Installation Time
10 to 15 minutes
Material / Finish
Epoxy encased
Quantity Included
1 wireless remote control system
Fitment / Application
Category
Details
Primary System
Existing 12-volt DC hydraulic pump application
Common Uses
Dump trailers, trailer jacks, boat lifts, snow plows, and similar 12V DC applications
Remote Use
Raise and lower the application from a distance or from inside a vehicle
Tethered Remote Use
Designed so the manual tethered remote that came with the hydraulic pump can still be used
Fitment Method
Verify the existing hydraulic pump and control setup before ordering or installation
Important Note
Verify your voltage, pump control setup, valve configuration, wiring terminals, and existing tethered remote arrangement before installation.
Important Compatibility Note:
This remote control system operates one 12-volt DC application, single or dual valve. Verify your hydraulic pump, wiring, voltage, valve setup, and installation requirements before ordering or installation.
Top Features
Feature
Buyer Benefit
Wireless Operation
Operate the application from 50 to 100 feet away
Up / Down Controls
Backup switches are located on both the box and the remote
Epoxy Encased
Weatherproof construction for harsh conditions
Easy Installation
Installs with 5 terminals and includes instructions
Overview
The RCS08 wireless remote control system is built to operate one 12-volt DC hydraulic application from 50 to 100 feet away. It allows the user to raise or lower an application while moving around the work area, staying at a safe viewing distance, or remaining inside the truck.
R&P Knowledge Hub
Compatibility: Built for one 12-volt DC application, including single or dual valve use where the existing setup matches.
Vehicle / System Fit: Commonly used with hydraulic pumps on dump trailers, trailer jacks, boat lifts, snow plows, and similar applications.
Installation Notes: Installation is listed as 10 to 15 minutes with only 5 terminals. Instructions are included.
Performance Insight: Wireless operation lets the user stand where the application can be seen while staying at a safer distance from the moving equipment.
Brand & Fitment Note
Selling Brand: Not specified in the provided information.
Application Reference: Dump trailers, trailer jacks, boat lifts, snow plows, and construction equipment use are application references only.
What This Means: This listing is for a wireless remote control system for compatible 12V DC applications, not a guaranteed OEM-branded replacement unless specifically verified.
Before Ordering: Verify your voltage, pump control setup, valve configuration, wiring terminals, and existing tethered remote arrangement before installation.
R&P Service Insight
This system is intended for convenience and control on compatible 12V DC hydraulic applications where the buyer wants wireless operation without giving up the original tethered remote.
- Remote Range: Operates from 50 to 100 feet away.
- Control Style: Hold down the button on the key fob to operate the application.
- Backup Control: Up/down backup switches are included on both the receiver box and remote.
R&P Repair Insight
Before installing a wireless remote system, confirm the application is a 12-volt DC setup and that the control wiring matches the 5-terminal installation style described for this system.
- Voltage Check: Confirm the application is 12V DC before ordering.
- Application Check: Confirm the system is being used on one compatible application, single or dual valve.
- Control Check: Confirm the original tethered remote and pump control setup can remain in place as intended.
Features
- 50 to 100 Foot Wireless Range: Operate your compatible 12V DC application from a distance or from the front seat of your truck.
- Commercial Quality Build: Built for construction equipment use and encased in solid epoxy for weatherproof protection in harsh conditions.
- Manual Remote Still Usable: The system is engineered so the tethered remote that came with the hydraulic pump can still be used.
- Built-In Backup Controls: Up/down backup switches are located on both the receiver box and the remote for practical operation.
- Easy Mounting Tabs: Designed with mounting tabs for straightforward installation on compatible equipment.
- On / Off Switch on Box: The receiver box includes an on/off switch located directly on the box.
- USA Made: Listed as USA made and built for years of use.
- Instructions Included: Comes with instructions written in the USA and installs using only 5 terminals.
Best Use Practices
- Verify the application is a 12-volt DC setup before ordering.
- Verify the pump control setup and valve configuration before installation.
- Verify the wiring terminals match the 5-terminal installation style described for this system.
- Confirm the original tethered remote and pump control setup can remain in place as intended.
Included Components
Quantity
Item
1
Wireless remote control system
1
Receiver box with on/off switch and up/down backup switches
1
Remote with up/down backup switches
1
Instructions
Customer response
“Wanted to tell you I really like the remote. Works perfectly from quite a distance and also inside the cab of my truck.”
- ***059richardb
Important Fitment Note:
This remote control system operates one 12-volt DC application, single or dual valve. Verify your hydraulic pump, wiring, voltage, valve setup, and installation requirements before ordering or installation.
RCS08 / G3-H01 Wireless Remote Control System
