When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FREE SHIPPING IN THE USA! (Limited time offer)This item was previously offered by our sister company Gun-Guides, LLC. All new Perfect Adapters™ will be shipped without the Gun-Guides® & Perfect Adapter™ logos and are only available from this website. Please check out our 25 year history with with 100% positive response.
SEE-THRU MODEL FOR TOP AND ANGLE EJECT MODELS - Please see images above.
Now you can use your original iron or fiber sights when you remove your red dot optic without removing our Perfect Adapter™ Mount.Our U notch design allow a clear view through the top of the mount all the way down to your front sight.
* You will NOT be able to see thru the bottom section of mount when your optic is installed on to the mount.Fiber optic sight shown here for clarity.
Finally, theres an option to use modern optics on your favorite old reliable lever rifle.
Perfect for fast action hunting or plinking!Unsolicited response from June 2026:
"These are so awesome! I’ve got them for me, my son and this is a spare.I'll send you pictures..."
DOES NOT INCLUDE RED DOT OPTICS SHOWN ABOVE (FastFire or UTG red dot optics).
Mounts to 1964 ~ 1981 Model 94s top eject models and all Model 1892 with two small plug screws on the left side of the receiver.Also fits 94’s and Angle Eject models (starting in 1983) that have been tapped for two #6-48screws with .405” (center to center).Winchester RANGER models (top eject), normally DO NOT have these two plug screws installed from the factory.
This will not fit MOST Winchester 94 XTR Series Big Bore. They have larger receivers.
HOWEVER, we have received emails and response from very happy customers that modified our mount (removed material from the right side) to custom fit their XTRs. Sorry, we cannot offer a refund once you've altered the mount.
This mount will NOT FIT on Model 71 and 1886 receivers.
Standard low profile 3 rail Picatinny rail.Includes mount, (2) high quality standard slot screws, and a stainless steel elevation set screw with soft tip (includes 1/16" Allen wrench).
Made from one solid billet of lightweight high quality aircraft aluminum.Matt black anodized finish.INSTALLATION TIP: Using a cartridge caliber specific laser or a muzzle/arbor laser device is VERY handy.
1. Place the UNLOADED rifle(Empty chamber and magazine tube) into a bench rest or secured within
bags withthe hammer forward and your finger off the trigger.
2 Project and point the laser in a safe direction out to around 30 feetor more if possible.
3. Simply adjust your dot optic to cover the projected laser dot.
You will most likely need to loosen the two side mounting screws to allow adjustment
for the top ELEVATION screw.
4. You are now ready for fine tuning at the range.
MADE IN THE USA. MADE WITH PRIDE.
* We ship the same or next business day.UPC:306659851964
★★★★★
INTERNATIONAL ORDERS:USPS 1st Class based on your location.
★★★★★
• ALL images and text are © 2018 ~ 2026 PerfectAdapter™ - ALL Rights Reserved.
