When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Brand newQuartex quartz clock movement
-All of my mini quartz movements require about a 3/8\" (9mm) hole going through the dial for the shaft of the movement to go through.
-This is a complete kit with one set of hands out ofseveral to choose from andmounting hardware.
-5 different shaft sizes to choose from
Which dial/face does your clockhave?
-For dials up to 1/8\" thick you need a 5/16\" threaded shaft which has an overall length of 9/16\"
-For dials up to 1/4\" thick you need a 7/16\" threaded shaft which has an overall length of 11/16\"
-For dials up to 3/8\" thick you need a 9/16\" threaded shaft which has an overall length of 13/16\"
For dials up to 1/2\" thick you need a 11/16\" threaded shaft which has an overall length of 15/16\"
-Not sure what to measure? Refer to picture 4 in the listing for help.
Movement specifications
-Case size:2 7/32\"H (5.6cm)x 2 7/32\"W (5.6cm)x 5/8\"D (1.6cm).
-Shaft Diameter:5/16\" (8mm)
-Motor:Self-Start, 1 second step.
-Rear Hand Set Knob
-Requires 1 \'AA\'cellbattery (not included)
Satisfaction and quality guaranteed!
-I offer a 1 year guarantee on my movements, no one else on does that for these movements, send it back and ill give you a refund or replace your movement!
-Check my response i make sure that customer service is first priority.
-If you have any questions feel free to ask!
