PRV AUDIO BUNDLE 2x-RS10-SUBD4 10\" Car Subwoofer 1x-RS2200BASS 1 Ohm Amplifier For Sale

PRV AUDIO BUNDLE 2x-RS10-SUBD4 10\" Car Subwoofer 1x-RS2200BASS 1 Ohm AmplifierBundle Description

• 2x RS10-SUBD4 10\" Car Subwoofers (Dual 4 Ohm)
• 1x RS2200 BASS 1 Ohm Monoblock Amplifier
  

RS10-SUBD4 10\" Car Subwoofers (Dual 4 Ohm)

This subwoofer was designed to be a great combination of price and performance without a compromise on quality. It is a must-have for daily builds where you want to keep electrical upgrades to a minimal and get excellent performance with a minimal amount of power.

• Bass machine that will reproduce low-end frequencies with authority with small amount of power
• 4 layer high-temperature copper voice coil capable of handling 1000 watts RMS program power, which makes high acoustic output
• High roll U surround gives an 17.5 mm of Xmax for low bass reproduction without any issues.
• Side forced cooling system with vented back plate design for better heat dissipation
• Dual 4 Ohm, easy setup to connect two subs in parallel to 1 ohm

This subwoofer features a beefy magnet motor that enhances its power and bass response, allowing it to handle more power and produce richer, fuller bass tones.

Its double magnet motor combined with flexible high foam surround allows for a remarkable 17.5mm Xmax, delivering high excursion guaranteeing to put out some crazy output.

Put some extra lows in your system with this 10″ sub, which can reach 1.50″ peak-to-peak excursion before damage! Providing deep low frequency bass!

GENERAL SPECIFICATIONSNominal Diameter10\" (254 mm)Nominal impedance4 + 4 OhmNominal Power Handling500 WattsContinuous Program Power (RMS)1000 WattsMax Peak Power2000 WattsSensitivity 1.41V at 1m84 dB (Parallel VC)Voice Coil Diameter2.6\" (65.5 mm)Voice Coil WireCopperVoice Coil Winding Depth40.0 mmFormer MaterialBlack AluminumMagnetic Gap Depth10.0 mmFrame MaterialStamped SteelRS2200 BASS 1 Ohm Monoblock Amplifier

Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly

• Smart Bass Amplifier – Monoblock 1 Channel 2200 watts at 1 Ohm TRUE RMS certified. Intelligent 4-way protection circuitry features high voltage, low voltage, shortage, and current protection. Built-in Clip LED indicators on the top panel.
• Manufactured with the highest quality components, such as heavy duty high current flow 4 gauge power inputs and 10 gauge speaker outputs.
• This Amplifier is equipped with a 19ft long wired remote level control ( bass Knob) for controlling the bass volume from the listening position with a convenient LED indicator for power and clipping.
• High Capacitance Reserve – Large capacitor bank designed to store more energy and provide a consistent bass, capable of astonishing power output over 2200 Watts. Operating Voltage 9 to 16 volts.
• True Heatsink – A small footprint heavy duty heatsink makes this small amplifier easy to install anywhere in vehicle. Overall 8.50″ Width by 5.90″ Length and only 2.60″ Height.

While targeted primarily subwoofer applications, the RS1400 has a built-in BASS BOOST level control from 0 to +10 dB at 35Hz, to easily set the lowest tones you want from your system.

2200 Watts RMS at 1 Ohm, tailored for bass frequencies between 5 and 200Hz, which can be set in different ranges on its built-in SUBSONIC and LPF Filters.

Adding this amplifier to your stock system is easy with the built-in HIGH-LEVEL INPUT converter. This system attaches directly to speaker wires using a speaker-level input as your audio input to the amplifier and with signal auto turn-on it eliminates the need to run a turn-on remote wire.

Built for Bass, experience lower, louder and more impressive bass than ever before!

Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists, all powered by heavy duty high current flow 4 gauge power inputs.

At only 4.15 lbs. allows any custom system to achieve the highest

GENERAL SPECIFICATIONSImpedance1 OhmChannels1 ChannelRated RMS Power at 14.0 V at 1 Ohm2200 WattsRated RMS Power at 14.0 V at 2 Ohm1800 WattsAverage Efficiency81%Operating Voltage9 to 16 VoltsMusical Current Draw140 AMinimum Power Wire Input(OFC) 4 GaugeProtection Fuse or Circuit Breaker150 AmpsMinimum Speaker Wire Output(OFC) 12 GaugeFrequency Response(-3dB)5 - 200 HzMin. Input Sensitivity for Max. Output200 mVSignal Input1 Pair RCASignal to Noise>90 dBProtection SystemLow & High Supply Voltage / Shortage on Output / Low Impedance on OutputHeat Sink TypeHeavy Duty Cast AluminumDimensions ( W x D x H )8.50” x 5.90” x 2.60”Weight4.15 Lbs