When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Items included:
1x Front polarizer(well pre-cut) - this polarizer has protective films on both sides. The marked adhesive side should be applied to the glass surface.
1x Back reflector(well pre-cut) - the reflector for DMG and Pocket has protective film on adhesive side only. The reflector for Light has two side films. The marked adhesive side should be applied to the glass surface.
Items introduction:
This replacement set can replicate 98% of the original Game Boy display colors. It has been preciselymachine-cut to appropriate size and angle, only needs to be applied to a cleaned original screen.
When the adhesive side of the polarizer still has its protective film on, the display will NOT look very correct. Don\'t hestate - remove the protective film, apply it to your cleaned screen, and you will achieve the desired results.
This replacement set canonlyfix the issue of screen burn and canNOTaddress any other screen aging issues, such as missing lines or liquid leakage.
Shipping:
We have set a reasonable price solely to provide retro gaming fans with the best product. To keep the price low, we will use NO tracking number shipping for free. If any issues arise during transit, please feel free to contact us. We look forward to your positive response to support our product. If you need USPS tracking number, pay additional shipping cost at check out step. Thank you for your understanding.
Screen Repair Experiences Sharing – I will update whenever I think of something:
DMG: When using a hot air gun to separate the bottom ribbon cable of a DMG screen, set the temperature to 720-850°F (380-450°C). The exact temperature may vary depending on the hot air gun. Direct the airflow towards the solder joints, NOT towards the brown ribbon cable.
Adhesive Removal: If you don\'t have a machine for removing screen adhesive, manually remove it by scraping off as much residual glue as possible while dry, then use adhesive remover liquid.
Personal opinion, please forgive me if it differs from your experience.
We are not responsible for any installation damages.
Gameboy screen is fragile.There are many good video tutorials on YouTube to tell how to clean original polarizer layers.If you have any questions, please feel free to contact us.
Enjoying!!! If you like our products, please leave response to support us.
Happy buying. Thank you.
