When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lightly Used Quackenbush Right Angle Positive Feed Drill 15QDARABSURS Current:
$749.00
This is a very lightly used Quackenbush right angle drill. The model is15QDA-RAB-SURS. It turns at 500 RPM\'s. Below are the factory specs. This is a current model tool.
15QDA-RAB-SU-RS Series Capacity: Aluminum – .5625” (14.3mm) Titanium – .4375” (11.1mm) Steel – .4375” (11.1mm) Stroke: Unlimited Min. – .375” (9.5mm) 15 series motor develops 1.0 nominal horsepower. Right angle tool designed for close quarter operation. Utilizes spindles of varying lengths to provide unlimited hole depth capability. Tool utilizes spindles which accommodate threaded shank, straight shank and morse taper. Easily adapted to oil hole drilling using a solid spindle and a fluid chuck, or with the use of an oil hole spindle and a fluid swivel. Stroke is adjustable by positioning the stop collar. Spindle continues to rotate in forward direction on return stroke to eliminate withdrawal spiral in hole. Rapid spindle retraction. Spindle can be retracted at any point during feed cycle by lifting retract lever. Automatic retract stop with protective rolling impulse clutch prevents accidental jamming of spindle at end of retract. Feed is engaged by pressing down on feed engagement lever. Tool is manually shut off at completion of drill cycle.
