When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Inkbird Prewire WIFI Temperature Controller Thermostat ITC-306A Heat 2 Probe APP:
$39.59
Inkbird ITC-306A WiFi Temperature Controller 110V
| For Heater Aquarium Breeding Reptiles Hatching
➢Dual Heating WIFI Aquarium Thermostat
➢Temperature Control Range: Measurement Range: Display Accuracy:0.1℃/℉(<100℃/℉), 1℃/℉(>=100℃/℉)
➢Uses: This aquarium thermostat is for fish tank, water terrarium, freshwater faltwater tank,tropical Fish Shrimp Coral Tortoise
Technical Parameters
- Voltage: 100~240Vac 50/60Hz | Current: 10A Max
- Wattage: 1200W(120Vac)
- Type of temperature probe: R25℃=10KΩ±1%；
R0℃=26.74~27.83KΩ； B25/85℃=3435K±1% - Display unit: Celsius ℃ or Fahrenheit ℉
- Ambient temperature: environment: Temperature: 20~80%RH (Unfrozen or condensation state)
- Temperature calibration
- Probe abnormal alarm | High and low temperature alarm
- Continuous heating time display window for simultaneous display of measured temperature and stop heating temperature
➢Dual temperature probes to ensure the accuracy of the water temperature
➢Dual relay controlling, one for control output, another for abnormal protection| How to keep your terrarium at 20 to 25 ° C?
➢Please set TS = 25, DS = 5.
➢The heater will switch on and start heating when the current temperature is below 20 ° C; When the temperature raised to 25 ° C, stop heating.
