Humidity Sensor Thermostat Humidistat Control+Reptile Humidifier Fogger 4L Tank For Sale

• 《Humidity Controller:
• 《Reptiles Humidifiers:

• **Power Input: 120VAC, 50Hz/60Hz
• **Power Output: Max. 10A, 120V AC
• **Humidity Measuring Range : 5%-99.99%RH
• **Humidity Control Range : 5%-99%RH
• **Resolution: 1%RH
• **Accuracy: ±3%RH

**Sensor Length：6.56ft (2m)
**Socket: 3.3x1.7x1inch (85x42x24mm)
**Input Power Cable Length： 5ft (1.5m )
**Output Power Cable Length：1ft (30cm)

• Work 1:To control humidifier
  Work 2:To control dehumidifier

**Designed for use in a mushroom, grow tent, or greenhouse; It also works as a reptile humidity controller

• Power: 120 Volt
• Input:50/60Hz, Max 27 Watt
• Fog outlet:Max380ml/hr
• Size: 4L/1gal

4L Water Capacity & Max Fog Output】: The reptile humidifier is equipped with a 4-Liter water tank, with adjustable fog output of up to 380ml per hour.

Dry-out Protection】: The reptile fogger will stop working when it runs out of the water(detected by a white buoy), and the indicator light will turn red.

Extendable Hose】: An extendable hose, from 25.2 inches~68.5 inches, and 2 suction cups, are come together with this Humidifier.

Anti-leaking Design】:
The water tank of the humidifier is detachable and would not leak when it is departed.

• Features: Humidity Humidity Controller
  • ➢Humidity Measurement Range: 5~ 99% RH. Relative humidity accuracy: ± 3% RH ~ ± 5% RH.
  • ➢Dual Display Windows: Display the set humidity value and the measured humidity value at the same time with 2 screens.
  • ➢Dual Relay Output: Support both humidifying equipment and dehumidifying equipment.
  • ➢Humidity Calibration: Support humidity calibration and dehumidification control delay protection.
  • ➢High/Low Humidity Alarm: Set a High/Low Humidity Alarm, which alarms and reminds you if the humidity value exceeds the setting value, and alarms when a probe error Operations
    1. Place the humidifier on a appropriate surface.
    2. Fill the water tank with clean water(See Filling The Water Tank below for more details).
    3. Plug in the humidifier to a 110-220V power source.
    4. Rotate the Fog Volume Regulator to turn on the humidifier and adjust the mist level, the indicator light will turn green when the humidifier is powered on.
    5. The indicator light will turn red if the tank is out of water.

    Package Content:

    • 1X Reptiles Humidifiers
    • 1X Humidity Controller
    • 《Humidity Controller:
    • 《Reptiles Humidifiers:
    《Humidity Controller:
    • Power Input: 120VAC, 50Hz/60Hz
    • Power Output: Max. 10A, 120V AC
    • Humidity Measuring Range : 5%-99.99%RH
    • Humidity Control Range : 5%-99%RH
    • Resolution: 1%RH
    • Accuracy: ±3%RH

    **Sensor Length：6.56ft (2m)
    **Socket: 3.3x1.7x1inch (85x42x24mm)
    **Input Power Cable Length： 5ft (1.5m )
    **Output Power Cable Length：1ft (30cm)

    • Work 1:To control humidifier
      Work 2:To control dehumidifier

    **Designed for use in a mushroom, grow tent, or greenhouse; It also works as a reptile humidity controller

    《Reptiles Humidifiers:
    • Power: 120 Volt
    • Input:50/60Hz, Max 27 Watt
    • Fog outlet:Max380ml/hr
    • Size: 4L/1gal
    Note:We recommend USE PURE WATER.
    ①Do not use extremely cold water or water over 40°C as it may damage the humidifier.②The humidifier can be used continuously for 7-12 hours after being filled with water.③Reptile Humidifier Fogger Terrariums Snake humidifier Enclosure Supplies,Reptile Mister for Vivarium, Humidifier for Grow Tent Plants

    4L Water Capacity & Max Fog Output】: The reptile humidifier is equipped with a 4-Liter water tank, with adjustable fog output of up to 380ml per hour.

    Dry-out Protection】: The reptile fogger will stop working when it runs out of the water(detected by a white buoy), and the indicator light will turn red.

    Extendable Hose】: An extendable hose, from 25.2 inches~68.5 inches, and 2 suction cups, are come together with this Humidifier.

    Anti-leaking Design】:
    The water tank of the humidifier is detachable and would not leak when it is departed.

    • Features: Humidity Humidity Controller
      • ➢Humidity Measurement Range: 5~ 99% RH. Relative humidity accuracy: ± 3% RH ~ ± 5% RH.
      • ➢Dual Display Windows: Display the set humidity value and the measured humidity value at the same time with 2 screens.
      • ➢Dual Relay Output: Support both humidifying equipment and dehumidifying equipment.
      • ➢Humidity Calibration: Support humidity calibration and dehumidification control delay protection.
      • ➢High/Low Humidity Alarm: Set a High/Low Humidity Alarm, which alarms and reminds you if the humidity value exceeds the setting value, and alarms when a probe error Operations
        1. Place the humidifier on a appropriate surface.
        2. Fill the water tank with clean water(See Filling The Water Tank below for more details).
        3. Plug in the humidifier to a 110-220V power source.
        4. Rotate the Fog Volume Regulator to turn on the humidifier and adjust the mist level, the indicator light will turn green when the humidifier is powered on.
        5. The indicator light will turn red if the tank is out of water.

        Package Content:

        • 1X Reptiles Humidifiers
        • 1X Humidity Controller