Huepar 3D Laser Level 360 Self Leveling Green & Hard Carry Case HM03CG+Receiver For Sale

• 360 Green Laser Level & Outdoor Pulse Mode: Huepar Laser Level has One 360° horizontal and two 360° vertical planes that enable users to cover the floor, wall, and ceiling all around the room. Through the \"H\" and \"V\" buttons, you could switch different direction lines and choose 4/8/12 lines. The Osram’s green beam is twice bright as the red laser with a working range of up to 30m of accuracy within ±3mm at 10m. The outdoor pulse mode helps extend the laser range up to 60m.
• Dual Modes & Self-Leveling: Huepar 3D laser level with slide switch enable you to set 2 modes. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±3°. Locking the pendulum initiates manual mode which locks the lines for manual alignment at other angles which are often required in decorating projects. Installing wainscoting on the stairs suddenly becomes a snap.
• Flexible Mounting with Magnetic Bracket: This green line laser offers 1/4\"-20 mounting thread for being fixed on a tripod or magnetic bracket. Equipped with a 360°Strong magnetic bracket allows for quick positioning to metal surfaces to hang the laser tool for rotation to the required angle and offers 1/4\"-20 and 5/8\"-11 mounting threads to suit different tripod threads for more fixing methods when laser working and suitable for picture hanging and hanging wallpaper at home projects.
• Type-C Fast Charging Port and Durable Battery: Huepar HM03CG Laser Level powered by a built-in 4000mAh 3.7V li-ion rechargeable battery that provides 8 hours of continuous running time. With Type-C charging port fully charged in 5 hours, 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent overcharging. The laser level can also be charged by phone, laptop, power bank, car charger, etc.
• Full Accessories & Two-Year Warranty: IP54 waterproof design protects the unit from water splashes, dust, and construction debris and ensures you work well in hazardous working conditions. The kit has a hard carry case for much more convenient carrying and storing the laser tool. We provide a 24-Month after-sale service and lifetime technical support. Please contact us freely if you have any concerns. You will get 1x HM03CG laser level, 1x magnetic bracket,1 x hard carry case, and 1 x charger.
  

Specifications for Huepar 3D Green Laser Level HM03CG:

• Projection: 3 x 360° Green Laser Lines
• Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
• Laser Wavelength: 505-520nm
• Horizontal / Vertical Accuracy: ±1/9 Inch at 33 Feet
• Leveling / Compensation Range: ±3°
• Leveling Time: 3s
• Working Distance: 98 feet (100 LUX), 200 feet with Huepar Laser Detector LR-6RG / LR-5RG
• Power Source: 3.7V / 4000mAh Built-in Li-ion Battery
• Reference Operating Time: About 8 hours with all laser beams on
• Mount Size: 1/4\"-20
• IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough
• Operation Temperature Range: 14℉ ~ 122℉ (-10℃~ 50℃)
• Storage Temperature Range: -4℉ ~ 158℉ (-20℃~ 70℃)

Items in the Package:

• 1 x Huepar HM03CG Laser Level
• 1 x Type-C Power Cord
• 1 x 360° Magnetic Pivoting Base
• 1 x Multilingual User Manual
• 1 x Hard Carry Case
• 1 X Huepar LR-5RG Digital Laser Detector
• 1 X Heavy-duty mode & Manual mode：

  Self-leveling mode:

  • When the laser tool is switched to the unlocked position, self-leveling mode is on.
  • This 3D laser level can quickly level within 3 seconds.
  • The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (3°±1°).

  Manual mode:

  • When the pendulum lock is in locked position, you can place the laser tool at various angles to have non-level straight lines.
  • The laser beam will blink every 3-5 seconds to remind you that it\'s not self-leveling now.

  Diverse Power Supply：Large-capacity li-ionbattery: 6 hours of extra-long working&Can be charged with type-c port.

  Bare battery charging: with type-c port.

  Direct input charging: This laser tool can be used at job site with direct input charging even if take out the battery.

  Charging protection help prevent the tool from overcharge.

  Wide Application & Easy to Install：
  • 1/4\"-20 female thread on the laser level can help to mount it to the tripod or laser mounting pole.
  • 360° Strong Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required.
  • 1/4\"-20 and 5/8\"-11 mounting threads on the bottom of the bracket for temporary fastening in place or being fixed on tripod or laser mounting pole and the laser line can be projected at any position or angle, which is very convenient for your work.
  Type-C Charging Port & Rechargeable Lithium Battery：

  This laser tool utilizes the included large capacity of 3.7V / 4000mAh lithium battery which provides up to 8 hours of running time and comes with the Type-C charging port that can be charged separately for the laser. The line laser enjoys lower energy consumption and longer battery lifespan, letting you use it more times without changing the battery frequently.

  Pulse Mode：
  • After power ON, short press pulse mode button to switch ON/OFF the pulse mode.
  • Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver.
  • It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only.
  • Note: Keep the pulse mode on when using with a receiver.
  Buzzer Remind：

  A beeping tone signals that the laser beam has been detected:

  ● A slower beeping tone signals – Move Up

  ● A fast beeping tone signals – Move Down

  Can toggle through the volume, or turn on Mute.

  Upgraded Bright Green Laser Technology：
  • The upgraded laser technology makes the Green laser beam bright and clear used indoors and outdoors.
  • This cross-line laser adopted the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.
  • At the same power, the green laser is twice bright as the red laser, with a working range of up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet.
  • This laser tool can fully meet indoor and outdoor projects.
  Lines Switching & 3D 360° Laser Lines：
  • Short press the \"H\" and \"V\" buttons on the keypad to switch the 360°Horizontal and 360°Vertical laser lines separately.
  • The three laser lines can be selected individually depends on job site applications.
  • Two 360° horizontal and one 360° vertical lines appear simultaneously providing all-around leveling coverage on the floor, wall, and ceiling all around the room.
  • Making it possible to greatly reduce the time loss associated with conventional horizontal alignment.
  • The 3D Laser Level provides all-around leveling coverage with an accuracy of ± 1/9 in at 33ft.

  Copyright © Huepar. All rights reserved.