When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This Interlock Kit Compatible with Eaton Cutler Hammer BR and CH Series Main 150 and 200 AMP Panels
This Interlock Kit Compatible with Eaton Cutler Hammer BR and CH Series Main 150 and 200 AMP Panels
Interval Space Required：1 1/4 - 1 7/16 Inch Spacing between main and generator breaker. Make sure the model numbel and spacing is correct, and they will work.
Installation Note: Before installing the interlocking kit, Attach the screws to the interlock kit first. Let\'s simulate the use of the test, so that we can better align the installation position, to avoid errors in the installation position, resulting in failure to use.
Package：Our Generator Interlock kit include 1 × Interlock plate, 3 × Screws kit, 1 × Drill Bit, 1 × Instruction Bulletin, 2 × Generator Start-Up Procedure Label, 8 × Remind Label, 2 × Zip Ties.
Safe use：the manual transfer switch device allow portable generator safe back feeding power supply to distribution panel and home line. Prevent utility and generator supplies from being ON at the same time. Aren\'t putting electrician in dangerous and damage electric devices during power outages.
