When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Master Tailgaters Replacement for Nissan NV200 (2013-2017)Backup CameraOE Part # 28442-JX01A
Replaces Model Number: 28442-JX01A (28442JX01A)
For use with: Nissan NV200 (2013 2014 2015 2016 2017)
This is an aftermarket backup camera, not OEM. This camera will plug into your existing wire harness. If your vehicle currently does NOT have a backup camera system, this camera will not work. Double Check your part number prior to ordering.
STEP ONE: CALL
Before ordering this item:
First, you need to call the Parts Department of your local dealer to find out your exact Part Number.
STEP TWO: CHECK
Double check your Part Number with our part number to confirm.
- Oftentimes, people buy the wrong camera because they only match the model/year of their car.
- To avoid this, you just need to compare your part number to this one and make sure they match!
STEP THREE: PURCHASE
Once you complete steps ONE and TWO, and confirmed a match, you can purchase this camera without having to worry about whether or not it will work for your vehicle!
Camera Specs:
- Sensor: ¼” On-Semi (USA) CMOS Active Pixel Array, Lens: Nidec (Japan) (Glass + Plastic)
- Minimum Illumination : .1 Lux light sensitivity
- Signal System : NTSC/PAL
- Effective Pixel : 728 x 582
- Electronic Shutter : 1/50 to 1/100,000 seconds
- Resolution : 600 TV lines
- Angle : 170 Degrees
- Waterproof Rate : IP68
- Power : DC 12V
- Video Cable: 4.25 inches
OE CAMERAS BACKED BY A 1 YEAR WARRANTY!!!
**ATTENTION: Before purchasing, make sure to call your local dealer to verify that your part number is an EXACT MATCH to this part number*
[For use with]: Nissan NV200 (2013 2014 2015 2016 2017) OE Part # 28442-JX01A (28442JX01A)
[Camera]: Wide angles up to 168°(Diagonal) + 100°(Vertical) + 136°(Horizontal); Designed for low light to .1lux
[Specs] Up to 800TVL; Waterproof to IP69K; Safe working temp from -104F to 220F. Japanese Nidec Lens, OnSemi USA Chip
[Plug and Play]: Plugs into Existing OEM Video Harness, no programming required
