ETERFANT 18L Class N Dental Medical Autoclave High-Temperature Steam Sterilizer For Sale

ETERFANT 18L ClassN Dental Autoclave Steam Sterilizer Medical Sterilization

Key Features:
- Cycle progresses automatically through conditioning, sterilizing, exhaust, and venting phases.
- Constructed from SUS304 or SUS316L stainless steel for durability and corrosion resistance.
- Two sterilization temperatures: 121°C/134°C, auto-starts once reached.
- Timer starts only after preset temperature is achieved, ensuring full sterilization.
- Manual door operation via rotating handle.
- Silicone rubber seals ensure uniform pressure sealing.
- High-capacity cylindrical chamber for diverse sterilization needs.

Parameters:
Rated Working Pressure: 0.22 MPa
Rated Voltage: 110V, 60Hz
Input Power: ≤ 1800 VA
Sterilization Temperature: 121℃ /134℃
Water Tank Volume: About 1 Liter
Noise: <70 db

Notes:
- Please do not place the sterilizer on an unstable worktable, such as a shaking table, slope, or the position of the vibration.
- Do not share the same electric outllet with other electrical apparetus.
- Please pay attention to correct voltage and frequency.
- Please do not block or cover the sterilizer door and vent.
- Please do not place anything on the sterilizer.
- Please close steam discharge valve before the disinfection.
- Before each use, must supply 800ml of distilled water .
- You can close the door after the tray is placed well. Turn the door handle clockwise until the door control light is green.
- The door handle of the sterilizer should be screwed tightly, otherwise the sealing ring will burst out during the sterilization process.
- When the pressure drops to 0 and wait 1-2 minutes, you can open the door.
- Always use the anti-heat gloves to load or unload the tray into the sterilizer in order to avoid scald.

Package Contents:
- 2 x Instrument Tray
- 1 x Instrument Tray Rack
- 1 x Protective Glove
- 1 x Draining Hose
- 1 x Instructions
- 1 x Door Seal

FDAStatement:
Thanksforyourunderstanding!