When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CryoGrip Pro Glacier Double-sided Build Plate 257x257mm BambuLab P1P P1S X1C A1:
$23.99
BIQU Panda CryoGrip Pro Glacier Double-sided Build Plate 257x257mm for BambuLab P1P, P1S, X1C, X1E, A1 - Achieve superior print adhesion with lower temperatures with the Cryogrip Pro spring steel coated built plate.
- Suitable for 3D printers with a platform size of 257x257mm, like Bambu-Lab P1P, P1S, X1C, X1E, A1.
- Also fits Prusa MK3, MK3s, MK3s+, and MK4.
- Compatible with PLA, PETG, ABS, PA and other filament.
- Has a fine satin build surface, making the parts smoother than typical PEI textured build plates, while having superior adhesion at lower temperatures.
- Includes AR Code stickers to ensure the plate is recognized by the X1C. Choose your own AR code according to the material that you print most often.
- Special Surface Texture: CryoGrip Pro Glacier Build plate is sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The build plate has Impact resistant, Corrosion Resistant, long life-span, zero risk of repeated bending causing the coating to peel off. The surface texture is delicate, making the bottom of the printed part smoother.
- Unparalleled Adhesion: CryoGrip Pro Glacier Build plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits warping, so there is no need to worry about print failure caused by the first layer breaking loose, greatly improving the print success rate. Designed to safely protect your printing at low temperatures. Enjoy perfect 3D printing without warping.
- Hollowed out handle design: The CryoGrip Pro Glacier Build plate handle only heats up slightly on the hot bed at 100℃, protecting your hands. After printing is completed, the build plate can be immediately removed and replaced with a new one to continue printing, without waiting for the build plate to cool down, thus saving energy and time.
- Perfect Compatibility: CryoGrip Pro Glacier Build plate is suitable for 3D printers with a platform size of 257x257mm, for Bambu-Lab P1P, P1S, X1C, X1E, A1. Compatible with PLA, PETG, ABS, PA and other filament.
- Own AR Code: The markings are compatible with the Bambulabs X1 build plate locating scan, to help verify build plate type. No need to worry about missing QR code error. Also, you can choose your own AR code, no need to worry about error codes when printing High-Temp material with the CoolPlate code.
|
