When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CORSAIR VENGEANCE DDR5 32GB (2 x 16GB) 5600MT/s CL36 — CMK32GX5M2B5600C36
TWO KITS AVAILABLE — YOU ARE BUYING ONE COMPLETE 32GB KIT
This listing is for ONE Corsair Vengeance DDR5 32GB kit, consisting of two 16GB modules. I have two identical kits available. If you want both, set the quantity to 2 at checkout and you will receive both kits.
Both kits are the same Corsair part number, CMK32GX5M2B5600C36, the same rated speed and timings, and the same module version 4.43.02.
A NOTE ON THE LABELS
The two kits carry Corsair's two different labeling formats, and you will receive one or the other:
One kit has sequential serial numbers printed on each module, ending in 00 and 01.
The other kit carries a shared lot code, A4XPT41184WPBN, with the two modules distinguished by a "-1" and "-2" suffix.
Both are normal Corsair factory labeling, and both kits are genuine factory-matched pairs. I mention it only so the labels are not a surprise if they differ slightly from a particular photo. All four modules across both kits are photographed in this listing.
CONDITION
Good physical condition. Heat spreaders are intact with no bends, dents, cracks, or peeling. Gold contact fingers are clean with no scratching, corrosion, discoloration, or evidence of arcing. PCBs are clean with no bent edges, no missing SMD components, and no signs of overheating. Normal light handling marks consistent with installation into and removal from a system.
TESTING
I tested this memory myself. It was pulled from a working system and verified running at its full rated XMP speed.
Test platform: AMD Ryzen 9 7900X on an ASUS TUF GAMING X670E-PLUS WIFI.
What the system reported:
- Speed: DDR5-5600 (2800 MHz clock), the full rated speed
- Timings: 36-36-36-76, 1T command rate
- Voltage: 1.25V
- XMP profile: active
- Mode: Dual-channel
- Type: DDR5-5600 / PC5-44800 UDIMM, non-ECC
Worth noting: both kits were installed and tested TOGETHER in that system, all four modules at once, and the platform detected the full 64GB and ran it at the rated DDR5-5600 with XMP enabled. Running four DDR5 modules simultaneously is considerably harder on a memory controller than running two, and these handled it. Since you are buying a two-module kit, you are getting memory that already proved itself under a more demanding condition than the one you will be putting it in.
Scope of testing: this was boot and XMP verification in a running system. It was NOT stress tested. I did not run MemTest86 and I did not perform an extended burn-in. I am telling you exactly what I did and nothing more. No errors, no crashes, and no instability were observed.
WHAT'S INCLUDED
- 2 x Corsair Vengeance DDR5 16GB 5600MT/s modules (32GB kit)
That is the complete contents per kit. NOT INCLUDED: no original retail packaging, no Corsair box, no clamshell, no documentation, and no accessories. The modules will ship in protective anti-static packaging for safe transit, but the original retail packaging is not available.
SPECIFICATIONS
- 32GB kit (2 x 16GB modules)
- DDR5-5600 / PC5-44800
- Timings 36-36-36-76, CAS latency 36
- 1.25V operating voltage
- Intel XMP 3.0 profile
- 288-pin unbuffered DIMM (UDIMM)
- Non-ECC at the system level; on-die ECC as part of the DDR5 standard
- Low profile aluminum heat spreader, 34mm tall
- Module version 4.43.02
- Black, no RGB lighting
COMPATIBILITY NOTES
- DDR5 ONLY. These will not fit or function in a DDR4 board. You need an AM5 board, an LGA 1700 board with DDR5 support, or a newer platform. Check your motherboard carefully — several board families ship in both DDR4 and DDR5 versions with nearly identical model names.
- XMP AND AMD SYSTEMS. These carry an Intel XMP 3.0 profile. AMD's equivalent is EXPO. Most current AM5 motherboards read and apply XMP profiles on AMD hardware, frequently labeled DOCP, and my test platform was an AMD X670E board running these at their full rated speed with XMP active. That said, this is not an EXPO-certified kit, and a board that is strict about it may require you to set timings manually.
- Without XMP or DOCP enabled in your BIOS, these will default to a JEDEC baseline speed such as DDR5-4800. That is normal for all XMP memory and is not a fault.
- These are unbuffered non-ECC desktop modules. They will not work in servers or workstations requiring registered (RDIMM) or system-level ECC memory. All DDR5 includes on-die ECC as part of the standard, which corrects errors within the memory chips themselves. That is not system-level ECC and does not make these ECC modules.
- LOW PROFILE: at 34mm tall, these clear virtually every large air cooler without interference. If you have had clearance problems with taller RGB memory, these solve that.
- IF YOU BUY BOTH KITS: running all four modules together is more demanding on a memory controller than running two, and results vary by CPU and board. These four did run together at 5600 on the platform described above, but I cannot promise that outcome on your specific hardware. Most platforms that struggle will still run four modules at a reduced speed such as 4800 or 5200.
AGE
Module version 4.43.02 is printed on the labels and visible in the photos. If the specific memory ICs matter for your tuning plans, that version number is what you would reference. I have not verified which ICs are underneath the heat spreaders and make no claims about them. Exact age is not known to me; these were acquired used and the modules carry no printed manufacture date.
I have tested this memory as described, but no bench testing can rule out every latent issue in used hardware. Please buy with that understood.
Shipping / Arrival Inspection:
If the package arrives with visible damage, please photograph the outer box, packing materials, and item before testing or installing it. Please keep all packaging until the issue is resolved, as the carrier may require it for an insurance claim. If there is any issue with the item on arrival, please contact me through messages so we can document everything properly and work toward a fair resolution.
Returns:
Returns are handled through according to the return policy shown on this listing. Please contact me through messages if there are any issues.
Feel free to message me with any questions before purchasing!
