When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Carbon Fiber Skinning Kit, 24 in x 5 ft Twill + 21 oz Epoxy
The wide rung. Ten square feet of real 5.7oz 3K 2x2 twill in a single 24 inch cut, so a hood, a dash or a fairing gets skinned in one piece with no seam to hide.
- 24 in x 60 in cut of 5.7oz 3K 2x2 twill carbon fiber, taped edges, one continuous piece
- 21.3 oz two-part epoxy kit (16 oz resin plus 5.3 oz hardener)
- 2 graduated mixing cups, 2 chip brushes, 4 stir sticks, nitrile gloves
- Step-by-step instruction card with a QR code to the walkthrough
Taped edges, cut oversize. Every cut edge is sealed with our blue cut tape so the weave arrives fray-free, and we cut 1 inch beyond the stated size so the advertised measurement is all clean fabric.
Coverage, stated honestly: 21.3 oz of epoxy wets out all 10 square feet and gives you two build coats over it. If you are chasing a deep glass-like gloss you will want a second epoxy kit for the extra build, and that is cheaper bought separately than bundled into every kit.
Ships rolled on a tube, never folded.
Ships free from Florida, same day on orders placed before 2pm EST. Non-hazmat, so it goes anywhere including PO boxes.
