CEN F450 Flatbed - Knight Customs 3d design-Full Kit Ready to build For Sale

WELCOME !!

Please read through entire listing as there is a wealth of great information below. We are including a lot of items that competitors are not to make your build quick and easy.

Ready to build and install on your CEN 450 straight out of the box, no down time, we\'ve sourced all the parts.

Authorized Licensed Knight custom printer. Printed and shipped from CA

This is the same kit that is being sold by Scale by Chris as well as the same exact design

Minimal cleanup needed, quality print ready to assemble directly out of the package, no paint needed, but can be sanded and painted if desired.

Super easy kit to assemble we rate this @ a build difficulty of 3-10.

\"Included in Kit\"

Body Printed in

Ultra durable Black PET-G Filament (Stronger and better heat resistance than PLA competitors)

• LT & RT Side boxes
• 6 Doors
• Middle Bed Section
• Front Headache rack
• Headache rack magnet mount
• Magnetic body mount (for install on Lexan body)
• (10) Light buckets (Housings)
• Please see the \"Also included section\"
• Rear bumper with receiver hitch mount
• (6) door handles

Tool Drawers Printed in

Ultra durable Grey PET-G Filament

• 8 Box Drawers

Lamp Lenses

Ultra durable Clear PET-G Filament

• (10) Clear lens covers

I\'ve done all the sourcing for you, I also Include the LED\'s WOW!!!

Competitors will ask you to source all these parts, (I include all these items so you can get right to work building)

\"Also included in kit\"

• Magnets:
  • (12) 3mmx1mm magnets for the bed doors
  • (6) 9mmx3mm magnets for the cab mount and head rack
• Screws:
  • (28) M3x8mm screws
  • (4) M3x15mm screws
• I provide Staples for door hinges as I found this works great, just the right size with no drilling
• (6) 5mm Red LED\'s (Wire ends will need to be soldered to a JST for receiver)
• (4) 5mm Amber/Yellow LED\'s (Wire ends will need to be soldered to a JST for receiver)

We have spent a good amount of time printing, building, and sourcing parts so you can get right to work straight out of the box.
ONLY THING YOU WILL NEED TO PROVIDESolder or Butt connectors for tail lamp wiringJST Y-Connector(s)JST Extension Cables to run from back of truck to middle where receiver box isPossibly Shorter Rear shocks(The bed has multiple shock mounting positions so yo u may be able to lay the shock down a bit and still use the stock shocks, but this is not guaranteed.

The most time consuming part is the wiring for the provided LED\'s, the included LED\'s come pre wired with approximately 6\"-8\" of wiring soldered to the LED\'s themselves but you will need to solder or use butt connectors, and Y-Splitters and extensions to get everything wired up together and ran up to the receiver box (You may need a new transmitter with an additional channel as well as an inline light switch that goes in between the lights and the receiver for correct on/off function of the lights.

Disclaimer

The fully assembled truck and silver metal tow hitch in the photos is not for sale nor included in this sale. Please see the sections labeled \"Included in kit\" & \"Also included in kit\" for included kit parts.

You will need to remove the stock bed from the cab to install this utility bed.

Contact usPlease message us for any questions we will be glad to help you through your build
No returnsI will provide replacement parts at buyers request with clear photos of any potential parts damage due to shipping, we will not cover installation error or general wear and tear or abuse of parts.