When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Borg Warner S300sx 369 .91ar 13009097051Turbo was bought to be used for a 2jZ back in 2021. Has sat since. Definitely needs to be disassembled and cleaned. Was working prior to being pulled. Message if needing more information or pictures and I'll try my best to answer. Best offer takes.
95lbs / min approx. 950 horsepower
S300 SX-E super cores contain the following exciting new features:
360 degree thrust bearing
Compressor cover integrated speed sensor port and pre-machined boost port
Flexible compressor cover outlet options (S300SX-E only)
Forged milled (billet) compressor wheels with extended tip technology
Optimized compressor stage aerodynamics
Interchangeable with existing turbine housings for upgradability
The BorgWarner super core assembly consists of the compressor cover attached to the cartridge, all cartridge to turbine housing mounting hardware, clamp plates, cap screws and mounting gaskets. Speed sensor and turbine outlet V-band are not included with turbo assemblies. Choose a turbine housing from our extensive list of factory housings as well as our custom cast performance housings.
Compressor Specs:
- Borg Warner 4" Inlet 2.5" outlet compressor housing with port shroud map width enhancement, pre tapped for speed sensor and pressure port. (parts not included and will need to drill through)
- 69.00mm inducer 91.44mm exducer FMW Forged Milled Wheel (Billet)
