When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PLEASE READ DESCRIPTION THOROUGHLY and LOOK AT THE PHOTOS
This sale is for a can motor flywheel upgrade kit for HO scale AHM Rivarossi 2-8-2, 2-8-4, 2-10-2, and 4-8-4 steam locomotives. This motor kit is designed to replace the round or squareRivarossi motor mountedin the cab. This motor kit willNOT work in new versions that have a flat can motor mounted inside the boiler.NOTE! Be sure to check to see if your engine has a motor inside the cab before purchasing this kit. If you do not see a motor inside the cab, then it is inside the boiler.
If you have any questions, please contact me before purchasing this kit. This may save you the hassle of returning the kit. IF YOU PLAN TO REPOWER A 4-8-4, PLEASE CONTACT ME BEFORE BUYING THIS KIT
This motor kit will provide smoother low speed operation, a more realistic top speed, and operating noise will be reduced. This motor kit IS NOT recommended for the articulated AHM Rivarossi steam locomotives. Ihave motor kits for the Y6B 2-8-8-2, Cab Forward, Challenger, and Big Boy articulated engines, please see my other sales. I have a motor kit for the Rivarossi 4-6-2 and 4-6-4 locomotives, please see my other sales.
If you have any questions, please contact me.
The motor measures 25mm long x 20mm high x 15mm wide, the motor shaft is 8mm long and 2mm in diameter. At 12 volts DC with no load, the motor draws 50ma and develops 9550 rpm, the stall current is 800ma. This is a high torque motor; this motor will start turning smoothly on 1 VDC. This motor is DCC compatible.
The flywheel is 13mm long and 9.5mm in diameter. The flywheel shaft is 19mm long and 2mm in diameter
The1st photo shows what the motor kit would look like installed on a Rivarossi 2-8-4 chassis. PLEASE NOTE: The chassis shown in the photo ISNOT included with the motor kit. This photo is for illustration only.
The 2nd photo shows the contents of the motor kit. What you see in the 2nd photo is what you will receive.
If you have any questions, please contact me.
This is an easy installation to do; Installation time is about 2 hours. The motor kit consists of 1 flat can motor, flywheel, flywheel shaft, flexible coupling, motor mounting pads, hook up wire, and illustrated installation instructions.
If you have any questions, please contact me.
This kit will be shipped via USPS Ground Advantage Mail.
Note to international buyers: determines the rates for international shipping, NOT ME. I have no control over what charges for international shipping.
Thanks for looking.
